
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
For Your Every Summer RSVP, with Code: SUMMER15
Description
Water Pump for Ford Territory SX/SY Barra 4.0 Petrol - MAP-101035 / MAP-101034Vehicle Fitment & Part Details This water pump with pulley is listed for the Ford Territory SX SY Barra 4. 0 Petrol (182 engine). Two variants are available clip in pipe connection (MAP 101035) or bolt hole connection (MAP 101034). Select the correct type by inspecting the removed water pump before ordering. Confirm compatibility by matching the listed fitment details and VIN engine chassis information where variants exist. SKU Comparison Select Clip
Vehicle Fitment & Part Details
This water pump with pulley is listed for the Ford Territory SX/SY Barra 4.0 Petrol (182 engine). Two variants are available — clip-in pipe connection (MAP-101035) or bolt hole connection (MAP-101034). Select the correct type by inspecting the removed water pump before ordering. Confirm compatibility by matching the listed fitment details and VIN/engine/chassis information where variants exist.
SKU Comparison — Select Clip-In or Bolt Hole
| Compare By | MAP-101035 | MAP-101034 |
|---|---|---|
| Pipe Connection Type | Clip-In Pipe | Bolt Hole |
| Pulley | 1 pulley included | 1 pulley included |
| Vehicle Fitment | Ford Territory SX/SY Barra 4.0 Petrol (2005–2011) | Ford Territory SX/SY Barra 4.0 Petrol (2005–2011) |
How to select the correct variant: Both water pumps fit the same Ford Territory SX/SY Barra 4.0 but use different coolant pipe connection methods. MAP-101035 has a clip-in pipe connection — the pipe pushes into the pump housing and is retained by a spring clip. MAP-101034 has a bolt hole connection — the pipe flange bolts directly to the pump housing. Inspect the removed water pump to confirm which type your vehicle uses before ordering.
Key Details
- SKU (Clip-In)
- MAP-101035
- SKU (Bolt Hole)
- MAP-101034
- Component
- Water Pump
- Included
- 1 pulley
- Primary Fitment
- Ford Territory SX/SY Barra 4.0 Petrol 6-cylinder (182 engine) (2005–2011)
Key Benefits
- Both clip-in pipe and bolt hole variants available on a single listing — select the correct type by inspecting the removed unit.
- Pulley included with both variants — no separate sourcing needed.
- Listed for the Ford Barra 182 inline-six as fitted to the Territory SX and SY series.
Vehicle Fitment
Fitment applies to both MAP-101035 (clip-in) and MAP-101034 (bolt hole).
| Make | Model | Body | Engine | Capacity | Years |
|---|---|---|---|---|---|
| Ford | Territory | SX/SY | Barra 182 (6-cylinder Petrol) | 3984 cc | 2005–2011 |
Fitment Notes
- Always match vehicle details before ordering. Confirm exact fitment using VIN, engine code, or chassis number if multiple variants exist.
- The Ford Territory SX/SY Barra 4.0 was produced with two different water pump pipe connection types during its production run. The only reliable way to confirm which variant your vehicle uses is to inspect the removed water pump — do not order based on year alone.
- MAP-101035 = clip-in pipe (pipe pushes in and is retained by a spring clip). MAP-101034 = bolt hole (pipe flange bolts to pump housing). These are not interchangeable.
Installation / Use / Maintenance Tips
- Drain the cooling system before removal. Compare the new water pump to the removed unit — match pipe connection type (clip-in vs bolt hole), pulley diameter, bolt pattern, and gasket face before fitting.
- Clean all gasket mating surfaces thoroughly and use a new gasket or O-ring as supplied or specified.
- Inspect the drive belt, tensioner, thermostat, and related hoses while the water pump is accessible — replace if worn.
- Refill with the correct coolant type and concentration per the Ford workshop specification, bleed all air from the system, and run the engine to operating temperature.
- After installation, check for leaks at the pump housing, pipe connection, and all hose joints during and after the first heat cycle.
Common Questions
How do I know if I need clip-in or bolt hole?
Inspect the removed water pump. If the coolant pipe pushes into the pump housing and is held by a spring clip, order MAP-101035. If the pipe flange bolts directly to the pump housing, order MAP-101034. Do not order based on production year alone — both types were used during the Barra 182 SX/SY production run.
Is the pulley included?
Yes, both MAP-101035 and MAP-101034 include one pulley.
Are these two pumps interchangeable?
No. The pipe connection types are different and the pumps are not interchangeable. Match to the removed unit before ordering.
How do I confirm fitment if there are multiple variants?
Use VIN, engine code, and chassis/platform details and compare them to the fitment section above. Inspect the removed water pump to confirm clip-in or bolt hole type. If unsure, request fitment assistance before ordering.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy