Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 5 - Jul 10
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Hydraulic Cam Follower for Mitsubishi Pajero, Mitsubishi Colt & Ford Husky - MAP-100997Vehicle Fitment & Part Details This hydraulic cam follower (MAP 100997) is supplied for Mitsubishi Pajero 2. 6 with the 4G54 petrol engine, with Mitsubishi OE reference MD337560. It measures 13mm x 26mm and is also listed for the 6G75 Pajero V8W V9W. Confirm compatibility by matching the listed fitment details, the OEM reference numbers, and VIN engine chassis information where variants exist. Key Details SKU MAP 100997 Component Hydraulic Cam
Vehicle Fitment & Part Details
This hydraulic cam follower (MAP-100997) is supplied for Mitsubishi Pajero 2.6 with the 4G54 petrol engine, with Mitsubishi OE reference MD337560. It measures 13mm x 26mm and is also listed for the 6G75 Pajero V8W/V9W. Confirm compatibility by matching the listed fitment details, the OEM reference numbers, and VIN/engine/chassis information where variants exist.
Key Details
- SKU
- MAP-100997
- Component
- Hydraulic Cam Follower
- Primary Fitment
- Mitsubishi Pajero 2.6 4G54 (1983-1991)
- Specs
- 13 x 26 mm
Key Benefits
- Cross-references 4 Mitsubishi OEM part numbers for ordering verification.
- 13mm x 26mm dimensions stated for direct comparison against the original lifter.
OEM Reference Numbers
- Mitsubishi: MD337560
- Mitsubishi: MD339767
- Mitsubishi: MD377561
- Mitsubishi: MD151382
Vehicle Fitment
Includes 29 supplied applications.
View Full Vehicle Fitment (29 applications)
| Make | Model | Engine | Years |
|---|---|---|---|
| Mitsubishi | Pajero 2.6 | 4G54 | 1983-1991 |
| Mitsubishi | Pajero 1.8i | 4G93 | 1999-2002 |
| Mitsubishi | Pajero 3.0 V | 6G72 SOHC | 1993-2000 |
| Mitsubishi | Pajero 3.0 V | 6G72 SOHC | 1994-2000 |
| Mitsubishi | Pajero GLS 3.5 | 6G74 DOHC | 1995-2001 |
| Mitsubishi | Pajero V8W/V9W 3.8 | 6G75 Petrol 3828ccm | 2006-2012 |
| Mitsubishi | Triton 3.5 M | 6G74 | 2007-2012 |
| Mitsubishi | Lancer 1.6 | 4G18 | 2003-2007 |
| Mitsubishi | Tredia 1.8 SL | 4G62 | 1983-1986 |
| Mitsubishi | L300 1800 Bus | 4G62 | 1983-1987 |
| Mitsubishi | L300 1800 LDV | 4G62 | 1984-1987 |
| Mitsubishi | L300 2000 LDV | 4G63 | 1987-2004 |
| Mitsubishi | Starwagon | 4G63 | 1986-1996 |
| Mitsubishi | Canter 2.6 | 4G54 | 1983-1993 |
| Mitsubishi | Colt 2000 LWB | 4G63 | 1994-1998 |
| Mitsubishi | Colt 2.0i | 4G63 | 1998-1999 |
| Mitsubishi | Colt 2.4i 4x2 | 4G64 | 1998-2008 |
| Mitsubishi | Colt 2.4i 4x4 | 4G64 | 1998-2008 |
| Mitsubishi | Colt 2600 LDV | 4G54 | 1995-1997 |
| Mitsubishi | Colt Rodeo 3.0 4x4 | 6G72 SOHC | 1994-1998 |
| Mitsubishi | Colt Clubcab 4x2 R/ | 6G72 SOHC | 1998-2009 |
| Mitsubishi | Colt 3.0i 4x4 | 6G72 SOHC | 1998-2009 |
| Colt | Galant 2600 | 4G54B | 1979-1984 |
| Ford | Husky 1 Ton 1800 | 4G62 | 1985-1987 |
| Ford | Husky 1 Ton 2000 | 4G63 | 1987-1997 |
| Ford | Husky Bus & Panel Van | 4G63 | 1986-1990 |
| Ford | Triton 0510 0610 | 4G54 | 1985-1986 |
| Ford | Triton 0610 | 4G54 | 1987-1996 |
| Mazda | B2600 4x4 LWB | 4G54 | 1988-1995 |
| Hyundai | Sonata 3.0 GLS | G6AT | 1994-1998 |
Fitment Notes
- Always match OEM reference number(s) and vehicle details before ordering. Confirm exact fitment using VIN, engine code, or chassis number if multiple variants exist.
- Compare the supplied 13mm x 26mm dimensions against the original lifter before ordering.
- Lifters are normally replaced as a complete set, not individually.
Important: Engine components such as bearings, pistons, rings, valves, gaskets, and related parts must be installed only by a qualified, VAT-registered workshop using proper measuring and torque equipment. Ensure crankshaft journals are measured and polished, oil clearances verified, and assembly lube applied. Failures due to oil starvation, contamination, incorrect sizing, or improper torque are not manufacturing defects and are not covered under warranty. Always replace engine oil, filters, and gaskets during installation.
Engine Parts Return Policy Warning
Returns Policy Notice: Engine internal components (including bearings, pistons, rings, gaskets, valves, etc.) are non-returnable once the sealed packaging has been opened. Returns are only accepted if the incorrect part was supplied and the item remains sealed, unused, and in original condition. Opened, fitted, dirty, or marked parts cannot be resold and are not eligible for refund or exchange. Please verify engine code, bore/size, and bearing grade before opening any packaging.
Installation / Use / Maintenance Tips
- Replace cam followers as a complete set, not individually, to maintain even valvetrain wear.
- Pre-soak hydraulic lifters in clean engine oil before fitting to bleed out air.
- Clean lifter bores in the head or block thoroughly before installing the new lifters.
- Inspect the camshaft lobes for wear or pitting and replace if damaged.
- Refill with fresh engine oil and filter, and allow the engine to idle gently on first start to let lifters bleed up before revving.
Common Questions
Will this hydraulic cam follower fit my Mitsubishi Pajero?
This part (MAP-100997) is listed for the fitments shown on this page. Confirm by matching the fitment details and verifying VIN/engine/chassis information where variants exist.
What OEM part numbers does this cross-reference?
Cross-reference numbers are listed in the OEM Reference Numbers section above. Match at least one to your original part before ordering.
How do I confirm fitment if there are multiple variants?
Compare the supplied 13mm x 26mm dimensions against your old lifter and use the engine code (4G54, 4G62, 4G63, 4G64, 4G18, 4G93, 6G72, 6G74, 6G75, G6AT) to cross-check. If unsure, request fitment assistance before ordering.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy