geschikt voor VW Golf Cabriolet MK3 1993-2002 Convertible 1.9 2.0 H-Beam Racing Conrods

Compatible for VW Golf Cabriolet MK3 1993-2002 Convertible 1.9 2.0 H-Beam Racing Conrods

Dit MaXpeedingRods onderdeel is geschikt voor Volkswagen-toepassingen waar vermeld. Controleer altijd onderdeelnummer, bouwjaar, motorcode en pasvorm voordat je bestelt.

Voordelen

• Gebaseerd op originele MaXpeedingRods productinformatie
• Geschikt voor directe vervanging of prestatie-upgrade

Toepassing, specificaties en compatibiliteit

Toepassing Geschikt voor VW 1.9 TDI PD130 PD150 Geschikt voor VW 2.0 TDI PD140 / PD170 ASZ BKDFitment details:Geschikt voor AUDIA3 / S3 / RS3 8L1（MK1） 1996 - 2003 Hatchback 1.9 TDIGeschikt voor AUDI A4 (8E,B6) 2000-2004 - 2.0/1.9 TDIGeschikt voor AUDI A6 (4B,C5) 1997-2005 - 1.9 TDIGeschikt voor AUDI A6 (4F) 2004-2011 - 2.0 TDIGeschikt voor SEATLeon 1M1 1999 - 2006 Hatchback 1.9 TDIGeschikt voor SEAT Toledo (1M) 1999-2005 - 1.9 TDIGeschikt voor SKODA Octavia (1U2) 1996-2010 - 1.9 TDIGeschikt voor SKODA Superb (3U4) 2002-2008 - 1.9/2.0 TDIGeschikt voor SKODAFabia I 6Y2 1999 - 2008 Hatchback 1.9 TDIGeschikt voor VWBora (1J2) 1998-2005 - 1.9 TDIGeschikt voor VW Golf MK IV 1997 - 2006 1.9/2.0 TDIGeschikt voor VW Golf MK III 1991- 1999 1.9/2.0 TDIGeschikt voor VW Golf Cabriolet MK III 1993 - 2002 Convertible 1.9/2.0 TDIGeschikt voor VW Passat B5 GP (3BG) 2001-2005 1.9L/2.0 TDIGeschikt voor VW Polo 9N_ 2001- 2009 Hatchback 1.9 TDISpecificatiesH-beam Conrods Quantity: 4 Pieces as showing in picture Big end bores tolerance: are honed to a +/-.01mm Advertised Horsepower Rating：200HP/piece Advertised RPM Rating: 7000-9000 rpm Bolts Size: Genuine ARP 2000 5/16" bolts The connecting rods all include ARP 2000 bolts, which are rated at 220,000 psi, and the optional ARP L19 material at 260,000 psi is available as an upgraded product.Torque: 26ft ≈ 35NMGarantie: one year warranty for any manufacturing defect Dimensions Center to center length: 144mm/5.669in Big end diameter: 53.7mm/2.114in Small end diameter: 26mm/1.024in taper small end Big end width: 24.95mm/0.982in Small end width: 24.95mm/0.982in Kenmerkens- Performance Con Rods.- The density of titanium is significantly lower than that of steel, while maintaining considerable strength, which means that it is lighter than steel, but the strength is very similar.1. Titanizing can further improve the bending strength of the product2. Titanizing will not affect the weight of the connecting rod3. Provide a wear-resistant layer, which greatly prolongs the service life of the parts- Genuine ARP 2000 bolts ,Optional ARP L9 fasteners available as an upgrade.- 100% CNC machined,Precision rod cap alignment dowels.- All big and small ends are finished with SUNNEN honing machine- 100% X-rayed, sonic tested.- Heat-treating Shot-peened for remained consistent and strong. Shot-peened finish to remove potential for stress risers.- Each rod is magnetic particle tested to ensure free of flaws.- H-Beam design reduces weight without compromising strength.- Come with the bronzed bushing suitable for the floating piston pin.- Bores finished to +/- .01 mm.- Balanced to within +/- 1 g per rod.- Custom available.Notice- Professional installation is highly recommended (No Instruction Included)- Custom Service: If there's no conrods you need on our site, we would be happy to help determine your requirements and develop a solution with you to satisfy your needs.