compatibel met Fiat Punto GT 1.4-1.6L 16V Turbo H-Beam Connecting Rods High Performance Conrods

Compatible for Fiat Punto GT 1.4-1.6L 16V Turbo H-Beam Connecting Rods High Performance Conrods

Dit MaXpeedingRods onderdeel is geschikt voor Fiat-toepassingen waar vermeld. Controleer altijd onderdeelnummer, bouwjaar, motorcode en pasvorm voordat je bestelt.

Voordelen

• Gebaseerd op originele MaXpeedingRods productinformatie
• Geschikt voor directe vervanging of prestatie-upgrade

Toepassing, specificaties en compatibiliteit

Overview The connecting rod, also known as the con rod, is the part of the piston engine that connects the piston to the crankshaft.The connecting rod and the crank convert the reciprocating motion of the piston to the rotation of the crankshaft.The connecting rod needs to transfer compression force and tension from the piston and rotate at both ends.

This connecting rod is guaranteed to geschikt voor Fiat Punto GT 1.4-1.6L 16V Turbo H-Beam.This is a Newconnecting rod replacement and is the perfect OEM & aftermarket connecting rod.

The high strain of the connecting rod due to tension, pressure and torsion requires the connecting rod to be designed with high strength and low weight. With the high-quality product range from Maxpeedingrods, you are always on the safe side.Toepassing Geschikt voor Fiat Punto GT 1.4 1.6L Turbo 4340 Forged Steel Specificaties- Performance Con Rods

Type: Forged 4340 aircraft chrome moly quality steel for racing

H-beam Conrods Quantity: 4 Pieces as showing in picture

Bolts: Including ARP 2000 bolts

Let op: Extra cost for upgrading to ARP L19 bolts

Bolts Size: ARP 2000 3/8" bolts

Tolerance: Balanced to +/- 1 gram in set

Piston Bolt Hole: +-4/1000mm

Power: 600hp ~ 800PS per set

Strength of the fastening (PSI): 220,000/230,000 PSI Torque: 48ft ≈ 65 NM

Top acceleration: 9000rpm

Garantie: one year warranty for any manufacturing defect Dimensions Center to center length: 128.52mm

Big end diameter: 48.63mm

Small end diameter: 22mm

Big end width: 25.40mm

Small end width: 25.40mm Kenmerken- Forged SAE 4340 Chrome Moly Steel for the highest strength and durability, dedicated for Racing

Designed and processed by CNC machine.

All big and small ends are finished with SUNNEN honing machine

Precision alignment sleeves positively locate the rod cap, maintaining big end bore size and eliminating cap walk

100% X-rayed, sonic tested and magnafluxed

Multi-stage heat treated

Shot peened to relieve stress

Come with the bronzed bushing suitable for the floating piston pin Let op- Professional installation is highly recommended (No Instruction Included)

Custom Service:If there's no conrods you need on our site, we would be happy to help determine your requirements and develop a solution with you to satisfy your needs.