Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 8 - Jul 13
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Piston Ring Set Renault Kwid Triber 1.0 B4D Engine Size Options 2C4090 HastingsVehicle Compatibility This piston ring set is designed for the following Renault small engine applications commonly found in the South African market: Renault Kwid 1. 0 B4D 404 petrol 2016 onwards Renault Triber 1. 0 B4D petrol 2020 onwards Specifications Part type: Piston ring set Engine code: B4D B4D 404 Engine capacity: 1. 0 litre petrol Ring diameter: 71. 00 mm Available sizes: Standard size code 000 Oversize 0. 50 mm code 020 Application: Renault
Vehicle Compatibility
This piston ring set is designed for the following Renault small engine applications commonly found in the South African market:
- Renault Kwid 1.0 B4D 404 petrol 2016 onwards
- Renault Triber 1.0 B4D petrol 2020 onwards
Specifications
- Part type: Piston ring set
- Engine code: B4D / B4D 404
- Engine capacity: 1.0 litre petrol
- Ring diameter: 71.00 mm
- Available sizes:
- Standard size code 000
- Oversize 0.50 mm code 020
- Application: Renault Kwid and Renault Triber 1.0 B4D engines
- Market: South Africa replacement engine parts
- SKU: 2C4090
Important: The customer must confirm the correct piston ring size (standard, 0.50 mm oversize, or 1.00 mm oversize) for the specific engine before placing an order or fitting this set.
Features
- Precision piston ring set matched to the Renault B4D 1.0 engine specification.
- Multiple size options to suit standard bores and reconditioned engines that have been rebored.
- Engineered to help maintain compression and oil control in everyday city and highway driving.
- Suitable for professional engine rebuilders and workshops working on Renault Kwid and Triber engines.
Why Buy From Us
- Local South African stock on Renault engine parts for faster turnaround and delivery.
- Twelve month warranty support on this piston ring set when installed under the correct conditions.
- Fitting advice available to help confirm the correct size option and application for your B4D engine.
Trusted by thousands of South African drivers and workshops for quality engine components and reliable service.
Installation & Maintenance Tips
- Have a qualified engine machinist measure the cylinder bores and pistons accurately to select the correct ring size (standard, 0.50 mm oversize, or 1.00 mm oversize).
- Confirm piston ring end gaps in the bore and adjust only according to the engine builder or engine manufacturer guidelines.
- Ensure that all ring grooves, pistons, and bores are thoroughly cleaned and free from carbon before installing the new rings.
- Check ring orientation and ring position carefully during assembly and follow the recommended stagger pattern for ring gaps.
- Use the correct running in procedure with suitable engine oil after the rebuild to help the rings seat correctly.
Engine Parts Installation Warning
This piston ring set is an internal engine component and must be installed by a suitably qualified engine builder or workshop. Incorrect ring size selection, poor machining, wrong clearances, or improper installation can cause serious engine damage.
- Always verify cylinder bore size, taper, and out-of-round before choosing standard, 0.50 mm, or 1.00 mm oversize rings.
- Follow the engine manufacturer or engine builder specifications for piston to bore clearance and ring end gaps.
- Make sure all components are cleaned thoroughly and assembled in a clean environment.
- Use correct lubricants and follow proper run in procedures after assembly.
Failure to follow these guidelines can lead to poor performance, premature wear, or engine failure.
Engine Parts Return Policy Warning
Engine internal components such as piston rings are sensitive precision parts. For quality and safety reasons, these items are generally not returnable once opened or handled if the correct part has been supplied.
- Please confirm the correct engine code and ring size (standard, 0.50 mm oversize, or 1.00 mm oversize) before ordering.
- Only unused, unopened sets in original, undamaged packaging can be considered for return when an incorrect part has been supplied.
- Sets that have been fitted, trial fitted, contaminated with oil, or mixed with other components cannot be accepted for return.
This helps to ensure that every engine part supplied to customers meets the expected safety and performance standards.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy