SKU: 80990581515

Tp-Link Mc220L Gigabit Sfp Media Converter

$53.96 $59.95
Save 10%
No.2 Bestseller on sylv1net.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Tp-Link Mc220L Gigabit Sfp Media ConverterDescriptionSpecificationsShipping The MC220L is a media converter designed to convert 1000BASE SX LX LH fiber to 1000Base T copper media or vice versa Designed under IEEE802. 3ab 1000Base T and IEEE802. 3z 1000Base SX LX LH standards, the MC220L is designed for use with multi mode single mode fiber cable utilizing the LC Type connector. It works at 850nm on both transmitting and receiving data when adopting multi mode fiber and 1310nm on both

The MC220L is a media converter designed to convert 1000BASE-SX/LX/LH fiber to 1000Base-T copper media or vice versa

Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX/LX/LH standards, the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the LC-Type connector. It works at 850nm on both transmitting and receiving data when adopting multi-mode fiber and 1310nm on both transmitting and receiving data when adopting single-mode

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINKs 19 inch system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs

The MC220L will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers and 10 kilometers when utilizing single-mode fiber

Works at 1000Mbps in Full-Duplex mode for both TX port and FX port

Supports auto MDI/MDIX for TX port

Provides switch configuration of Force /Auto transfer mode for FX port

FX port support hot-swappable

Extends fiber distance up to 0.55km for multi-mode fiber and 10km for single-mode fiber

Easy-to-view LED indicators provide status to monitor network activity easily

External power supply

MEDIA CONVERTER AND MODULE

  • Standards and Protocols: IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x
  • Basic Function: Full Duplex Flow Control (IEEE 802.3x), Extends fiber distance up to 0.5km using 50/125um fiber
  • Ports: 1 x Gigabit SFP port, 1 x 1000M RJ45 port (Auto MDI/MDIX)
  • Wave Length: Depends on the used SFP module
  • Network Media 1000BASE-FX: Multi-mode/Single-mode SFP module
  • Network Media 1000BASE-T: UTP category 5, 5e, 6 cable (maxium 100m), EIA/TIA-568 100 ohms STP (maximum 100m)
  • LED Indicators: PWR, LINK, RX
  • Dimensions: 94.5(W) x 73.0(D) x 27.0(H)mm
  • Power Supply: External Power Adapter
  • Max Power Consumption: 3.95W
  • Safety and Emission: FCC, CE
  • Environment Operating Temperature: 0 to 40 degC, Storage Temperature: -40 to 70 deg C, Operating Humidity: 10% to 90% non-condensing, Storage Humidity: 5% to 90% non-condensing
  • OEM: NWTL-MC220L
  • SKU: LD00162
    • Shipping Notes
    • Free Standard Shipping on $100+ Orders to the USA.
    • Except Preorder products are shipped in 48 hours.
    • Delivery to the USA:
    1. Standard Shipping : 3-10 business days
    • If time is of the essence, please consider selecting expedited delivery for faster service.
    Exchange/Return Notes
    • We offer a 30-day return/exchange service after receiving.
    • Final sale items are not eligible for returns or exchanges.
    • To process your return/exchange, please contact us at [email protected]
    • Please click here for more details>>> Return & Exchange Policy
    SKU: 80990581515

    Discover Niche Categories That Outsell

    Top-Converting Item to Boost Your Average Order

    4.3 ★★★★★
    Based on 2340 reviews
    Sort
    Highest Rating
    Newest First
    Oldest First
    Product Reviews
    A
    Verified Purchase
    Amazon Customer
    San Leandro, US
    ★★★★★ 1
    Good looks that betray a flawed locking mechanism
    Style: Charging MagSafe Mount
    I wanted to love the Spigen TapLock—its sleek design and promise of a secure, easy-to-use latch mechanism had me hopeful. At first, it felt solid, and the concept of a spin-to-lock system was clever. But after just a few weeks, the latch mechanism started failing. It wouldn’t adhere properly anymore, and the spin-to-lock feature became completely non-functional—no amount of spinning tightens the lock. Fixing it? Near impossible. The design buries the mechanism in a way that makes repairs a nightmare, and there’s no clear way to realign or replace parts without breaking it further. It’s a shame because the build quality isn’t terrible otherwise, but this critical flaw tanks it. One star—looks good, works briefly, then betrays you. The charge speed is pretty good.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on March 6, 2025
    M
    Verified Purchase
    mrnyknicks
    Charlottesville, US
    ★★★★★ 5
    Good product
    Style: Charging MagSafe Mount
    Great product. It allows my iPhone 15 pro to sit at the right angle so that it is not completely behind steering wheel. I like that it doesn’t use a glue base to secure to monitor. I have taken It off 3 times and it went back on well. The only negative I can find is that it’s a little bouncy or I should say more than I would like it to. I would recommend to a friend.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on February 12, 2025
    D
    Verified Purchase
    D. Miller
    San Leandro, US
    ★★★★★ 3
    So so. Could be great with few improvements
    Style: Charging MagSafe Mount
    Overall, this mount is decent with good functionality and quality but a few things (short permanently affixed wire, no way to stow/hide, fixed arm length) make it annoyingly fall short of great. (Phone S24+, TPU case, ESR "magsafe" metal ring sticker) GREAT: Arm rotation (i.e. portrait/left to landscape/top) is super easy with one hand via a simple push of a button that clicks into position every 45 degrees. Great design unique to this model. Most others require a cumbersome loosening and retightening mechanism that is difficult with one hand and tedious to position where wanted. GOOD: Build quality. Secure and reliable attachment to screen without adhesive. Reliable wireless charging. Pad swivel/tilt is easy while staying tight and secure without any nut/screw to loosen. Includes attractive velcro (for carpet) and adhesive (for plastic) wire routing clips. SOSO: Magnet could be stronger to support phones (like mine) with a simple metal ring vs a fully magnetized magsafe insert - still holds strong enough while driving tho. No way to stow/hide the mount when not in use - no folding hinge - the pad bumps against the display when rotating down, so it won't rotate behind - no folding hinge either. Arm length not adjustable - my S24+ is positioned nicely as-is but larger phones may cover the Tesla display and smaller phones may be too far away from it. BAD: Wire too short to completely hide behind dash and under floor mat. Made worse by a permanently attached wire at the mount. Would be much better if attached via usbc, so it could be replaced with longer wire. NOTE: If a screen protector is installed on the Tesla display, this will cause it to bubble around the clamped edges.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on December 23, 2024
    D
    Verified Purchase
    Daveworx
    Chelsea, US
    ★★★★★ 4
    Very well designed mount but loosens over time
    Style: Charging MagSafe Mount
    Works amazing but over time the mount loosens up and the phone sags or rotates on its own. There is no way to tighten it more - only the part that connects to the Tesla display.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on November 8, 2025
    D
    Verified Purchase
    David Modoski
    Boise, US
    ★★★★★ 5
    Great phone mount for Tesla.
    Style: Charging MagSafe Mount
    Firstly, I love that it is fastened to display via a turn knob. The previous product I had was attached by adhesive and in the summer it would fall off. Which is the reason I purchased this product. I also love the ability to adjust the arm so mount the phone whichever way you'd like.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on December 28, 2025

    recommand products

    Tin Jig 'Tinware T2105' - 56mm x 94mm for Mimaki UJF-7151 Flatbed Printer (xx Spaces)
    174.47
    Star Blanks - 72mm / 7.2cm Stars - 3mm MDF Product Blanks
    68.00
    Phone Case Printing Jig Base Plate for A3 Flatbed Printers
    171.95
    A6 Notebook Printing Jig for A3 Flatbed Printers
    195.47
    Notebook Printing Jig (145mm x 215mm) for A4 Flatbed Printers
    136.47