Evolution Aqua Pond Filter EazyPod AUTOMATIC Ponds up to 10000L
SKU: 72260959057

Evolution Aqua Pond Filter EazyPod AUTOMATIC Ponds up to 10000L

Sale price$355.48 Regular price$394.98
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 6 - Jul 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Evolution Aqua Pond Filter EazyPod AUTOMATIC Ponds up to 10000LEvolution Aqua Pond Filter EazyPod AUTOMATIC Ponds up to 10000L EAZYPOD AUTOMATIC The automatic choice for your pond Award winning UK aquatics manufacturer Evolution Aqua have launched the new EazyPod Automatic pond filter. The EazyPod Automatic is a self cleaning, mechanical and biological filter system for garden ponds up to 10,000 litres. The integrated control box contains an adjustable timer which initiates a cleaning cycle automatically even

Evolution Aqua Pond Filter EazyPod AUTOMATIC Ponds up to 10000L

EAZYPOD AUTOMATIC - The automatic choice for your pond

Award winning UK aquatics manufacturer Evolution Aqua have launched the new EazyPod Automatic pond filter.

The EazyPod Automatic is a self-cleaning, mechanical and biological filter system for garden ponds up to 10,000 litres.

The integrated control box contains an adjustable timer which initiates a cleaning cycle automatically - even when you’re not there!

Inside the control box, the electronic connector blocks control the automated waste valve, along with your choice of circulating pump (not supplied). It even houses an integral air pump which kicks in automatically to clean the K1 Micro media.

Crystal clear, healthy water is achieved by K1 Micro filter media, which also provides enhanced biological benefits by way of its protected surface area.

HOW THE EAZYPOD WORKS

The concept of the EazyPod Automatic is simple and yet innovative.

The water enters the outer chamber, which runs around the entire circumference of the EazyPod. Between the outer chamber and the inner chamber, there is a stainless steel perforated screen. These perforations are situated in the lower half of the screen and around its entire face. This means that when the water passes from the outer to inner chamber, a downward and upward flow is created. This causes many of the larger solids to settle in the base of the outer chamber, due to the force of gravity.

The size of the perforations will not allow large mechanical waste to enter the inner chamber, thus acting as a first stage mechanical filter. The inner chamber holds 18 litres of static K1 Micro media. As the water enters the inner chamber, the fine smaller solids become entrapped in the K1 Micro. After passing through the K1 Micro, the clean water then rises and overflows into the inner return pipe. From here it returns to the pond via the return outlet.

The EazyPod Automatic filtration system gives water quality and clarity that surpasses all expectations. The nature and volume of the K1 Micro means, that when static, apart from being a very efficient mechanical filter, there is more than enough surface area for beneficial bacteria to colonise. Therefore on a smaller pond, the EazyPod Automatic is an excellent complete filter.

AUTOMATIC CLEANING – Even when you’re not there

The K1 Micro is cleaned by the integrated air pump located inside the control box, that is connected to the air line in the EazyPod Automatic, which in turn goes to an air ring in the base of the inner chamber. The air ring has small holes in it which causes the K1 Micro to move and therefore clean itself.

During the cleaning cycle, the finer particles escape into chamber from the K1 Micro. This waste water will be automatically dumped via a 1½ inch motorised ball valve.

Cleaning is fully automated on the EazyPod Automatic, and is controlled by a built-in timer, which is factory set at one clean every 3 days, however, this is easily adjustable to fit in with your pond requirements.

The EazyPod Automatic will run a cleaning cycle which lasts approximately 6 and a half minutes.

EazyPod Automatic cleaning cycle:

  • Adjustable timer kicks in to start a cleaning cycle
  • The amber light on the control box illuminates
  • Control box automatically switches circulating pump off
  • Air pump inside the control box is switched on to clean the K1 Micro media
  • After the K1 Micro media has been cleaned, the automated waste valve opens
  • The EazyPod Automatic is drained to waste
  • The automated waste valve closes. (Both green and amber lights are illuminated)
  • When the waste valve is fully closed, the air pump is switched off
  • When only the green light is illuminated, the circulating pump switches back on
  • EazyPod Automatic returns to filtration mode

*NOTE: If the circulation pump does not switch on, then the waste valve is not fully closed and you will see both the green and amber lights illuminated. This safety feature is built in to ensure that you cannot empty your pond.

Adjusting the Cleaning Cycle
If you do not want to have your EazyPod cleaned once every 3 days, as is factory set, you can alter the cleaning frequency to suit your needs. Simply turn SCREW A and SCREW B to point to the different digits using the sequences shown in the tables below:
Use a pozi-drive screwdriver to turn the screw head, so the arrow on the dial points to the appropriate digit.
SCREW A - This screw sets the time of the cycle. (Factory set pointing to 10 d)
SCREW B - This screw sets the frequency as a percentage of the time set above. (Factory set pointing to 30%)

INSTALLATION
Pump Fed Install Only
By this we mean that if your pump is going to be used to supply the water to the filter, and the filtered water then returns back into your pond via gravity, i.e. down a waterfall, or through a large diameter pipe, this is referred to as PUMP FED (i.e. the water is fed to the filter using a pump).

Please note - some secondary images display the UV version - this is purely for illustration purposes and this listing is for the standard model.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 72260959057

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 1897 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
P
Pj
Omaha, US
★★★★★ 5
Much more than a pizza maker
This is more than a pizza maker. There are 15 different settings that makes this a great air fryer. I will probably not use all of the features but it gives me options for if I choose to. The size was a little surprising because it is bigger than expected, however I just replaced it with my old air fryer. This has great levels of heat, easy to clean and gives alot of versatility.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2025
O
op_jamf
Pawtucket, US
★★★★★ 5
This thing is AWKWARDLY HUGE but AWESOME!
Let me start by saying that this is not a pizza oven. It's an air fryer that also works as a pizza oven. You can do everything you do with an air fryer here. I'm gonna be honest: This thing is AWKWARDLY HUGE. We spend some time trying to figure out where to put it after realizing the size. You can cook a frozen pizza or a fresh one, with great results. But, again, you'll be able to bake, broil, roast and more. I love it has space enough for chicken wings and vegetables. My air fryer is tiny so this one gives me great advantage. Once you move on from the fact that it's difficult to store in your kitchen, you'll love it. Really easy to use: set timer and press start. After use, you can remove the tray and wash it in the sink. Don't forget to check the instruction manual for recipes and tricks on how to master this thing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2025
H
Hibenz
West Palm Beach, US
★★★★★ 5
Amazing
Amazing! Very easy to set up and use. Comes with pre heating options.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2025
S
Verified Purchase
Stacey W.
Battle Creek, US
★★★★★ 5
I Love the Typhur Sync wireless meat thermometer
Size: 2 Probes, Size: 2 Probes
I Love the Typhur Sync wireless meat thermometer. I bought it on sale and it is worth the money. It is exactly what I wanted and hoped for in a remote temperature sensor. It also had a little paper that came with it with the factory tested calibrations listed for this unit. I had a chance to do some initial testing with the Typhur Sync yesterday Feb 23rd 2024. I did a little runthough to get acquainted with it using a store bought already cooked Baby Back rack of ribs. Not the best choice as it was already cooked but at $10 from Costco it was ok to sacrifice. And it still turned out good. I Cooked on a Weber Genesis E-330 propane grill and used a smoke tube. In the past I have used this propane gas grill to smoke Ribs, Port Shoulders and Brisket with a Smoke tube. It is possible using one side burner and a Smoke Tube. I had also previously tried smoking with a custom smoker tray from Weber for my grill, which used wood chips, but that was mostly a failure. And I tried a Hot and Cold smoker unit on the back but it had limited success with the heat on. But using a smoke tube and one burner on low you can do an ok smoke on the grill if you can verify your temperatures. What I always struggled with was having faith in the grill hood's thermometer. It turns out the thermometer reads hotter than what the grill temps actually are around the meat! That resulted in an even slower low and slow cook and would not develope bark on pork shoulder. Using the Typher Sync you can see the internal meat temps on 5 spots in the thermometer Probe plus it has one external ambient temperature sensor. So 6 total temps per Probe and you get two Probes! When using the wifi mode it never looses signal. The base unit just should be kept close to the smoker, like 3 to 60 feet or so and it will relay the bluetooth data from the Probes immediately to the wifi so you can use the APP to see your status of the cook. Alternatively you can just use the base with wifi or bluetooth in a manual or smart mode. When I did my test it did a firmware update prior to the start of the cook as it told me one was available to install. That took like 2 minutes since it was already in wifi mode. The firmware version I used was: 100016. From the APP you can configure 1 or 2 Probes for individual use on the same hunk or meat or two separate items on the same or different grills with the same or different cooking parameters. It depends on how you set it up. You choose the meat type and cut and the final temp to reach for that cut with some temperature recomendations that you can adjust. It senses the internal temps from 5 internal sensors and displays an temps of all 5 and an average depending on if you are in Basic mode (white background with less details) or Professional Mode (black background and more details) The Professional mode seems best for me. Seeing all the temps helps to verify that the Probe is placed in a good location. If it is improperly placed some readings may read too hot meaning it is too close to the surface or exposed. So in those cases, reposition the Probe. On a thick peice of meat the cent most sensor will read cooler than the others depending on their distance to the surface. You can use the external sensors to help determin how to position the meet for your cooker or grill. All grills swwm to have hot and cooler areas. If it is cooler on one side or the other, reposition the meat to get it more equal. Or use the cooler side for the thinner end of the meat. This can also be verified by the checking internal temperatures or you can use both probes on the same piece of meat like I did for this rack of ribs which naturally has a thicher end and a thinner end. I have included some of the pictures from the cook with some photos of the base unit and others in the App at various times on the cooking process. The app displays a graph with the target internal ending temperature, The current and past temperatures of each of the 5 interal sensors and the 1 external sensor. Each Probe has its own graph line on the screen. You can slide back and forth between the Probes. You can also go back to the main status screen that shows basic stats of both Probes on one screen at the same time but no graphs or individual sensor readings. It main status screen shows the averaged current reading for internal tempurature, ambiant external temp, target temp and the estimated remaining time before reaching the target tempurature. This is the same as the base unit will display. The Pro version of the app can be selected by toggling the icon in the upper righthand corner. It displays all the same information as the Basic mode and much more. The Pro version displays separate graph lines for each of the 6 temperature sensors. It also displays an outline of the Prope near the top of the display along with the positions of all the sensors in the Probe! You can press one of the temperature sensors locations and it will highlight its graph line. You can further slide your finger around that graph line and it displays the temperature at that position on the line! But the App also warns you that your cook is within 5 minutes of completing with an autible sound if you have your notification sound volume turned up. It also displays a message on top of the current APP screen display. And when you start the cook it will warn that your notification sound is not turned on or up enough. It has messages for each Probe for 5 minute before the cook ends, when the Cook completes, Please remove your food from heat, and Cooking complete after it is done with the 5 minute resting period. It also will remind you that your Probe was not returned to the base unit after a while of sitting in normal room temperatures! Along the way those warnings alert you with a chime sound via your notification sound. It also warns you if your notification sound is turned off when you go to complete the setup of your cook. The base unit will also alert and sound for most of these steps as well. The sound on the base unit will stop when you acknowledge the warning/alert on the App or the unit. The app and base unit also tracks the battery levels of the base unit and both Probes. During the 3 hours I played with it they were at Full the whole time. The App also has a pretty extensive meat setting menu for selecting your type of meat: Beef Pork, Poultry, Lamb, Fish and Other and Manual setting. Other has Venison, Mutton, Kangaroo, Goat and Other! It also lets you select the type of cut for that meat with suggest temps for all cuts. If appropriate it gives you temperature selections for Rare, Medium Rare, Medium, Medium Well, and Well done for most meats. And you can overide any of those to chose your own setting if you like it a bit more or less done. The App also has recipes but there are not currently any taylored for use with a Typhur Sync. But there is also an "Explore" section in the App that had some good articles. Make sure you press the arrow > link to see them all. It has topics like Reverse Sear Steak Temperature and Time, Carryover Cooking: Remove Your Meat at a Lower Temperature than Target, Best Tri Tip Temp: How to Know If Tri Tip is Done, How Long to Grill Chicken Breast Perfectly Juicy and various other guides. The Typhur Sync is a very nice quality unit. It works well and it will be great for keeping track of a longer 10+ hour brisket or shoulder. Or even for shorter cooks in a air fryer or oven or grill where you want a particular internal temperature and do not want to over shoot it by waiting to long on a recheck with a hand held unit. Please see all the photos for better detail. The place where the ambient temperature drops was from opening the grill hood to put some sauce on the ribs and check things. Great Product!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 24, 2024
A
Verified Purchase
Amy
Fort Morgan, US
★★★★★ 5
Great Product, Even Better Customer Service
Size: 2 Probes, Size: 2 Probes
I purchased this product last August and had kept it in storage without using it even once. A few days ago, I finally took the thermometer out for its first use, but even after charging it, there was no response and it would not turn on at all. At first, I was very disappointed and confused because I had never even had a chance to use it. I contacted customer service and provided a detailed report, including my purchase information, the condition of the device, and photos. Their team responded quickly and arranged to send me a replacement right away for the unit that had apparently become completely discharged and unusable. They shipped the new device the very next day and also provided the tracking number. The replacement arrived safely a few days later, and I was very happy to use it today. The Typhur Sync WiFi Wireless Meat Thermometer is very convenient to use. I really like its clean design, app connectivity, and the way it provides accurate real-time temperature readings. On top of that, Typhur’s customer service was clear, fast, and very helpful, which made my overall experience even more satisfying.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 10, 2026

recommand products