SKU: 71068248507

Frost F-422-70C - Surface mounted Hands Free Combination Paper Towel/Waste Receptacle

$422.98 $469.98
Save 10%
No.2 Bestseller on sylv1net.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Frost F-422-70C - Surface mounted Hands Free Combination Paper Towel/Waste ReceptacleFrosts 422 70 series stainless steel hands free combination units are durable and very high quality. Typically, these units are found in office buildings, schools, retail outlets, sports facilities, and other commercial properties. The durable construction and high quality stainless steel make these units a popular choice. Made with durable high quality North American stainless steel Cabinet door hinged with full length stainless piano hinge and is

Frost’s 422-70 series stainless steel hands free combination units are durable and very high quality. Typically, these units are found in office buildings, schools, retail outlets, sports facilities, and other commercial properties. The durable construction and high quality stainless steel make these units a popular choice.

  • Made with durable high quality North American stainless steel
  • Cabinet door hinged with full length stainless piano hinge and is secured with tumbler lock
  • All stainless welded construction with locking removable waste bin
  • Removable waste receptacle allows for convenient maintenance
  • Comes with standard bag holder apparatus
  • Front loading for easy service and maintenance
  • Dispenser provides quiet and uniform paper delivery
  • Two keys provided
  • 9' AC adapter included

Frost code 422-70 series is designed to dispense Jumbo 8″ diameter (2.5” reserve roll) x 8″ wide roll towels, core size of 1.375″ and greater. The units are universal; meaning, the unit is non-proprietary and dispenses paper from standard commercial paper producers. This allows the end user to avoid getting locked into paper supply contracts and should save them money on their janitorial supplies. The unit is automatically operated when placing a hand within the large detection zone. An adjustable length of towel, between 6″ and 9″ (15.2 cm – 22.9cm) will then be dispensed. It can be refilled by unlocking the dispenser from the top. The lid will then swing down and new paper can be inserted. Please note that it is important to switch the unit off prior to installing new paper. The product can be powered with the AC adaptor (included) or four “D” size alkaline batteries. Four alkaline batteries have been independently tested and found to provide 35,000 hand dries. 

  • The waste receptacle has a capacity of 50 litres (13.2 US gal., 11 Imp. gal.)
  • Dispenser: front is all welded construction of 22 gauge type 304 stainless steel, no.4 brushed finish
  • Body: 22 gauge stainless steel type 430 brushed finish
  • Back: 22 gauge stainless steel type 430 brushed finish
  • Waste receptacle: 22 gauge stainless steel type 430 brushed finish
  • 43.8cm W x 142.5cm H x 22.6cm D (17.25″ W x 56.1″ H x 8.9″ D)
  • 422-70A – 22.7kg (50 lbs), 422-70C – 26.3kg (58 lbs)
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 71068248507

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 1823 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
G
Verified Purchase
Gianluca Ritz
Chelsea, US
★★★★★ 4
Works well, but it doesn't come with drywall anchors
Bought it to wall mount my wifi router. The whole thing is very small, but the straps are very long, so it can support many devices. The straps also get reasonably tight. Installation is easy, it's nice that it comes with a level. Annoying that it only comes with six screws, and no drywall anchors. So you either have those, have to go get them, or screw it to a stud (which you probably should do depending on how he heavy the object you want to mount is).
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 19, 2025
A
Verified Purchase
Angel Esteva
Carnegie, US
★★★★★ 5
Clean, sturdy way to mount a cable box/router (easy install)
Used this TotalMount to get my cable box/router off the shelf and tidy up the setup behind the TV. Install was straightforward (screws/anchors included), and the mount feels solid once it’s on the wall. The adjustable fit is the best part—it held my device snug without bending or wobbling, and there’s still enough airflow so it doesn’t feel “choked” in place. It also helps a lot with cable management since everything stays in one spot instead of hanging or sliding around. Tip: measure your device first and lightly tighten, then do the final snug once it’s centered. Overall, great value if you want a cleaner, more organized setup.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 25, 2026
D
Verified Purchase
david m. kirkeby
Grantham, US
★★★★★ 5
Used it to hang two routers on the wall
This product was surprisingly good. For my purposes it was better than it needed to be. The drywall screws provided were very easy to use. I attached one side of the mount to a stud but I think for most purposes the drywall screws would have been adequate. I was surprised that they had channels in the plastic for the straps. This certainly made the molds for this product more expensive to make, but it made the straps easier to thread through the mount than if the had just made it so the straps went between the device and the wall. The product had a level. For my purposes it would have been fine without that but it did make it a little easier to install. I mounted two routers (one was our network router and the other was a router that provided a land line telephone) side by side in this mount. I separated them a bit so as to allow each to cool. It was a nice improvement over having the routers flopping around on a desk and periodically falling on the floor. I gave it five stars overall. It was nicely built, I couldn't see what they could have done better, the price seemed reasonable and it got here in a timely way.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 21, 2021
K
Verified Purchase
Kyle
Boise, US
★★★★★ 5
Easy install and perfect mount for PS3 Slim
I struggled to find a mount for my PS3 slim and as I already have TotalMount's PS4 Slim mount, I had the utmost trust in this one. Installation is already easy and made easier with the built-in level. Simply hold level and screw/drill in screws. But honestly, one of the best things about this mount are the included screws. Their thick threading ensures that the mount being ripped off or loosened is almost impossible. As for the quality of the mount holding my PS3 Slim, which isn't exactly light (7 lbs), no complaints. It was pain to set up within the straps as I needed a second set of hands, but it is very secure and I trust it's not going anywhere. But as a tip for anyone installing heavier objects, make sure the adjuster buckles are near the top. Because of the PS3's weight, it unavoidably weighed the straps down so I found that tightening the console near the top secures it in places without gravity playing too much of a role. But I recommend do trying to avoid using this mount for heavier things in general.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2021
D
Verified Purchase
Darin Colby
Lowell, US
★★★★★ 3
Excellent For the Price
The mount is much smaller than I had originally thought but that does not really pose a problem as the straps are excessively long allowing for large items. It is very straight forward and easy to install. The plastic buckle on the provided straps are less than impressive as they do not tighten as much as I would like. That having said that I'm not in fear of it falling because each is secure and snug against the console. If your item is larger than the mount than it will be able to move length-wise as the straps are not connected to the mount but rather you push them through the provided slots. On my next install, I'm going to try using a wedge or clamp that will keep the straps secured to the mount to mitigate this. The install hardware consist of 6 bear-claw style drywall screws. These are have very poor quality control as 2 of the screws had 1/4in metal shavings attached to them one of which sliced open my finger during install. I was using a simple screwdriver and was being moderately careful as to not damage the plastic. I recommend using anchors that you are more familiar with. Also I will be using washers next time as the holes in the plastic have a small lip in them that the screw is supposed to snug up to and I don't feel as comfortable with it after actually mounting the console. I did a fair amount of tugging on the straps to try and tighten them and was worried I may pull the mount loose. Over all, I very much like this item. It is very versatile and you cannot beat the price. i will defiantly be buying this again and using my own hardware to mount so that I feel more secure putting expensive items 6 ft off the ground. Darin ( Electrician, Handyman, Tinkerer)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 28, 2022

recommand products

Ford Pioneer Flexplate 164-Tooth Neutral Steel # FRA-206
150.00
FORD 460 V8 1977 - 1978 THERMOSTAT HOUSING WATER NECK # AO4215
45.00
Buick 1955 1956 Distributor Points # DR2437P
45.00
Standard Motor Ignition System Condensers Ford V8 Early # FD77
25.00
FORD WINDSOR WELCH PLUG KIT PIONEER # 830004
30.00