Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Esab Dual Shield 7100 Ultra .045" x 33 LB SpoolFlux Core DS 7100 ULT Welding Wires, . 045 in Dia., 33 lb Spool Like many other Dual Shield products, Dual Shield 7100 Ultra operates in a wider parameter range and generates less welding fumes than many similar welding wires. The low spatter levels and easy slag removal minimizes post weld cleanup. Dual Shield 7100 Ultra can be used with either 100% CO2 or 75% Ar 25% CO2. This versatility in gas selection provides the fabricator greater flexibility
Flux Core - DS 7100 ULT Welding Wires, .045 in Dia., 33 lb Spool
Like many other Dual Shield products, Dual Shield 7100 Ultra operates in a wider parameter range and generates less welding fumes than many similar welding wires. The low spatter levels and easy slag removal minimizes post weld cleanup. Dual Shield 7100 Ultra can be used with either 100% CO2 or 75% Ar/25% CO2. This versatility in gas selection provides the fabricator greater flexibility in choosing both wire and gas.
Typical Weld Metal Analysis %
| Typical Weld Metal Analysis % | ||||||||||||||
| C | Mn | P | S | Si | ||||||||||
| 100% CO2 | ||||||||||||||
| 0.02 % | 1.3 % | 0.010 % | 0.013 % | 0.5 % | ||||||||||
| 75% Ar - 25% CO2 | ||||||||||||||
| 0.03 % | 1.6 % | 0.010 % | 0.012 % | 0.6 % | ||||||||||
Approvals
| Approvals | ABS BV CWB CSA W48; E491T-9-H8, E491T-9M-H8 DNV-GL LR |
| Approvals are based on factory location. Please contact ESAB for more information. |
Typical Charpy V-Notch Properties
| Impact Value | Testing Temperature |
| 34 J(25 ft-lb) | -29 degC(-20 degF) |
| 58 J(43 ft-lb) | -18 degC(0 degF) |
| 57 J(42 ft-lb) | -18 degC(0 degF) |
| 47 J(35 ft-lb) | -29 degC(-20 degF) |
Classifications
| AWS A5.36 : E71T1-C1A2-CS1-DH8 AWS A5.20 : E71T-9C-DH8 AWS A5.36 : E71T1-M21-CS1-DH8 AWS A5.20 : E71T-1C-DH8 ASME SFA 5.36 : ASME SFA 5.20 : AWS A5.20 : E71T-1M-DH8 AWS A5.20 : E71T-9M-DH8 |
Consumable Characteristics
| Welding Current | DC+ |
| Alloy Type | C Mn |
Typical Tensile Properties
| Condition | As Welded | As Welded |
| Shielding Gas | 100% CO2 | 75% Ar - 25% CO2 |
| Tensile Strength | 585 MPa(85 ksi) | 605 MPa(88 ksi) |
| Yield Strength | 515 MPa(75 ksi) | 540 MPa(78 ksi) |
| Elongation | 26 % | 26 % |
Recommended Welding Parameters
| Current | TTW Dist. | Voltage | Wire Diameter | Wire Feed Speed |
| 100% CO2 | ||||
| 135-205 A | 9.5-12.7 mm(3/8-1/2 in.) | 23-26 V | 1.2 mm(.045 in.) | 381-660 cm/min(150-260 in./min) |
| 205-230 A | 12.7-19 mm(1/2-3/4 in.) | 25-27 V | 1.2 mm(.045 in.) | 660-965 cm/min(260-380 in./min) |
| 230-265 A | 19-25.4 mm(3/4-1 in.) | 26-30 V | 1.2 mm(.045 in.) | 965-1321 cm/min(380-520 in./min) |
| 125-235 A | 12.7-16 mm(1/2-5/8 in.) | 23-26 V | 1.4 mm(.052 in.) | 279-584 cm/min(110-230 in./min) |
| 235-290 A | 16-19 mm(5/8-3/4 in.) | 25-29 V | 1.4 mm(.052 in.) | 584-864 cm/min(230-340 in./min) |
| 290-350 A | 19-25.4 mm(3/4-1 in.) | 29-31 V | 1.4 mm(.052 in.) | 864-1194 cm/min(340-470 in./min) |
| 165-270 A | 16-19 mm(5/8-3/4 in.) | 25-28 V | 1.6 mm(1/16 in.) | 279-508 cm/min(110-200 in./min) |
| 270-345 A | 19-25.4 mm(3/4-1 in.) | 27-30 V | 1.6 mm(1/16 in.) | 508-762 cm/min(200-300 in./min) |
| 345-415 A | 25.4-31.75 mm(1-1.25 in.) | 28-32 V | 1.6 mm(1/16 in.) | 762-1067 cm/min(300-420 in./min) |
| 110-135 A | 9.5-12.7 mm(3/8-1/2 in.) | 23-25 V | 0.9 mm(.035 in.) | 559-838 cm/min(220-330 in./min) |
| 135-160 A | 12.7-16 mm(1/2-5/8 in.) | 24-28 V | 0.9 mm(.035 in.) | 838-1118 cm/min(330-440 in./min) |
| 160-185 A | 16-19 mm(5/8-3/4 in.) | 26-30 V | 0.9 mm(.035 in.) | 1118-1397 cm/min(440-550 in./min) |
| 75% Ar - 25% CO2 | ||||
| 115-145 A | 9.5-12.7 mm(3/8-1/2 in.) | 23-25 V | 0.9 mm(.035 in.) | 1118-1397 cm/min(440-550 in./min) |
| 145-165 A | 12.7-16 mm(1/2-5/8 in.) | 24-27 V | 0.9 mm(.035 in.) | 1118-1397 cm/min(440-550 in./min) |
| 165-190 A | 16-19 mm(5/8-3/4 in.) | 25-30 V | 0.9 mm(.035 in.) | 1118-1397 cm/min(440-550 in./min) |
| 130-200 A | 9.5-12.7 mm(3/8-1/2 in.) | 22-26 V | 1.2 mm(.045 in.) | 381-660 cm/min(150-260 in./min) |
| 200-225 A | 12.7-19 mm(1/2-3/4 in.) | 24-27 V | 1.2 mm(.045 in.) | 660-965 cm/min(260-380 in./min) |
| 225-265 A | 19-25.4 mm(3/4-1 in.) | 27-29 V | 1.2 mm(.045 in.) | 965-1321 cm/min(380-520 in./min) |
| 135-250 A | 12.7-16 mm(1/2-5/8 in.) | 22-26 V | 1.4 mm(.052 in.) | 279-584 cm/min(110-230 in./min) |
| 250-295 A | 16-19 mm(5/8-3/4 in.) | 25-29 V | 1.4 mm(.052 in.) | 584-864 cm/min(230-340 in./min) |
| 295-355 A | 19-25.4 mm(3/4-1 in.) | 27-31 V | 1.4 mm(.052 in.) | 864-1194 cm/min(340-470 in./min) |
| 185-285 A | 16-19 mm(5/8-3/4 in.) | 24-28 V | 1.6 mm(1/16 in.) | 279-508 cm/min(110-200 in./min) |
| 285-340 A | 19-25.4 mm(3/4-1 in.) | 27-30 V | 1.6 mm(1/16 in.) | 508-762 cm/min(200-300 in./min) |
| 340-400 A | 25.4-31.75 mm(1-1.25 in.) | 28-32 V | 1.6 mm(1/16 in.) | 762-1067 cm/min(300-420 in./min) |
Deposition Data
| Current | Deposition Rate | Diameter | Efficiency (%) | Voltage | Wire Feed Speed |
| 100% CO2 | |||||
| 192 A | 2.5 kg/h(5.5 lb/h) | 1.2 mm(.045 in.) | 79 % | 25.5 V | 762 cm/min(300 in./min) |
| 230 A | 3.3 kg/h(7.4 lb/h) | 1.2 mm(.045 in.) | 82 % | 27 V | 1016 cm/min(400 in./min) |
| 275 A | 4.4 kg/h(9.6 lb/h) | 1.2 mm(.045 in.) | 83 % | 28.5 V | 1270 cm/min(500 in./min) |
| 150 A | 1.6 kg/h(3.6 lb/h) | 1.4 mm(.052 in.) | 76 % | 23.5 V | 381 cm/min(150 in./min) |
| 190 A | 2.2 kg/h(4.9 lb/h) | 1.4 mm(.052 in.) | 78 % | 24 V | 508 cm/min(200 in./min) |
| 250 A | 3.5 kg/h(7.7 lb/h) | 1.4 mm(.052 in.) | 82 % | 25.5 V | 762 cm/min(300 in./min) |
| 300 A | 4.7 kg/h(10.3 lb/h) | 1.4 mm(.052 in.) | 83 % | 27 V | 1016 cm/min(400 in./min) |
| 105 A | 1.3 kg/h(2.8 lb/h) | 0.9 mm(.035 in.) | 86 % | 24 V | 635 cm/min(250 in./min) |
| 140 A | 2.1 kg/h(4.6 lb/h) | 0.9 mm(.035 in.) | |||
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 407 reviews
Sort
Product Reviews
★★★★★ 5
Easy to use!
These work great for a metal workshop! Holds up my 6ft ladder and pressure washer hose with ease. Definitely recommend
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 20, 2026
★★★★★ 4
25 lb hanger doesn’t hold my Echo trimmer
Size: 4" - Red, Style: Open Hooks, Size: 4" - Red, Style: Open Hooks
Purchased the holders for my Echo trimmer and hedger but the tines are not long enough to hold the Echos. A picture in the description shows a gas powered unit hanging which is why I bought the hangers. Buy the larger 45 lb hanger for trimmers. Nice hook but I’ll probably send them back if i can’t find a use for them soon.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 30, 2025
★★★★★ 5
Handy
Size: 4" - Black, Style: Open Hooks
I use an ocean container for storage and have some things that need to be hanging. These are perfect for any place you are unable to drive nails. I bought the stronger ones and have had no problems. Ordered more after trying them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
★★★★★ 5
Great gift for men who have everything for garage
Bought these as a gift for a man who has everything but these hooks. He loved them. size was perfect for garage and the magnetic strength was great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
★★★★★ 5
good quality
Size: 4" - Black, Style: Open Hooks
Really strong magnets. Holds up stall cleaning forks on the trailer wall even when under way
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 4, 2026