Kurzweil K2500 VAST 90's Classic Synthesiser Workstation - 240V
SKU: 57433919443

Kurzweil K2500 VAST 90's Classic Synthesiser Workstation - 240V

Sale price$811.82 Regular price$902.02
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 8 - Jul 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Kurzweil K2500 VAST 90's Classic Synthesiser Workstation - 240VKurzweil K2500 VAST 90's Synthesiser Workstation 240V The Kurzweil K2500 keyboard version is a professional 76 key synthesiser workstation built around Kurzweils powerful V. A. S. T. synthesis engine. Released in the 1990s, it offers 48 voice polyphony, deep sound programming, MIDI control, and onboard sequencing, making it a serious studio and performance instrument rather than a simple preset keyboard. A respected workstation from Kurzweils classic

Kurzweil K2500 VAST 90's Synthesiser Workstation - 240V
The Kurzweil K2500 keyboard version is a professional 76-key synthesiser workstation built around Kurzweil’s powerful V.A.S.T. synthesis engine. Released in the 1990s, it offers 48-voice polyphony, deep sound programming, MIDI control, and onboard sequencing, making it a serious studio and performance instrument rather than a simple preset keyboard. A respected workstation from Kurzweil’s classic era, the K2500 remains valued for its flexible synthesis architecture and professional build.

Condition:
  • This unit has been used.

  • This unit is in good condition overall. It shows some general wear from use and age like some marks, nicks and scratches. Some of the paint has come off under the keys. Please see photos for further details. Overall it is still a nice synth.

  • This unit has been serviced. We can confirm it is 100% functional. It has no faults to note.

  • The screen is nice, bright and clear!

  • This unit has 64mb of RAM and 235K of P-RAM installed.

  • Please be aware this unit is 240V. This means this K2500 is ready to plug and play within Australia and New Zealand.

  • This unit powers on with a standard IEC cable.

  • If you purchase from outside Australia you will need a step-up transformer to use this unit. Please contact us if you need any help sourcing the correct product.

  • This sale is for the unit only. No other parts, cables or accessories are included unless mentioned above.
Postage:

Pick up would be preferred and is free. You can pick up from West Gosford, NSW. 2250.

If you are in a remote area you will most likely incur extra fees before this unit can ship out. This is because the unit weighs 20KG without packaging. Please contact us before purchase if you are unsure.

International import tax, duty, vat, custom fees or any other charges are not covered by us, nor included in the shipping fees. These are the responsibility of the buyer. International shipping will be very expensive. Please contact us for a direct quote.

Return Policy:

Returns will only be accepted for manufacture defects / faulty items. Please contact us if you have any problems with your purchase and we will strive to work it out with you.

Please contact us with any enquiries, and check our other listings for more pro audio and accessories.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 57433919443

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 1743 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Mike
Dallas, US
★★★★★ 5
I love it!!
Style: Dual Arms, Size: 17"-33"
I love this product. I do a lot of gaming and you tube watching. At the same time a lot. With this I keep my desktop clear so I can have my notebooks there and can still have both my monitors up and running. Another plus is if I decide to sit on the couch and play the console I can turn the screen a full 180 degrees so I can setup you tube and play games on the T.V. using the console. The product itself feels to be of decent quality. It is not all plastic. The clamp is nice and strong.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
E
Verified Purchase
Ezra
Charlottesville, US
★★★★★ 3
Gets the job done. Just barely.
Style: Dual Arms, Size: 17"-33"
It holds up my monitor, but just barely, and without any confidence or finesse. I had to move on from my previous arm mounts, the HUANUO. Those claimed to hold up to a 30 inch monitor and support 20 pounds. When I upgraded to a Samsung Odyssey Neo G8, it could no longer perform its duties. The gas shock was up to task, but the final adjustment piece that tilts it up or down was a hard down. Queue this piece of hardware! 22 pounds is more than 20, and 32 is more than 30. This time I'm not even technically out of spec. The clamping force seems more than adequate to hold this to my desk. I will, at this point, basically walk you through how I feel about this mount, based on the order of installation instructions. The way it goes together means that you will have to pull your desk out to maneuver the clamp in place before snugging it back up to the wall, a point in the HUANO's favor since it had a clever leveraging mechanism that lets you hang it with your desk still against the wall. The way cords route through the arms close to the base means that you have to route them before you put the swivel arm on the base. This is because it has a screw at the front and back to secure the cover, and the angle/height are such that you cannot fit a screwdriver into the bottom one after you mount it. While not impossible to do with it installed, it would involve a right-angle screwdriver. They provide one of those, but the screwdriver bit of it is on the long shaft, and you would need it on the short shaft to get to that screw. The way the swivel arms mount on the base is less than ideal as well. The arm slips onto a robust metal hub, and you tighten a screw that pushes against a plastic tab that makes it harder or easier to move. The location for this screw faces the wall. So you must turn the arm at an extreme angle to make it tighter or looser. Not a big deal, but noticeable. Top arms go on smoothly, cable routing is simple and easy. No complaints about this section. Mounting the monitor. The instructions are to mount the plate to the monitor, and then slide the plate onto the holder and secure it with the screw. I did this for neither of my monitors, although I tried it for my second. My big monitor went smoothly by mounting the bracket ahead of time and just forcing the arm down into position while my monitor rested on my desk. I tried this for my second bracket, but it was much harder to do with the monitor in a vertical orientation. So then I tried to do it the way the instructions wanted. I would have been able to do so, but my monitor has the mounting location set into the back of the monitor. This means that you can't mount it flush and then slide it on because you don't have clearance. So I tried to use the spacers. The spacers aren't spacious enough and the screws bottomed before snugging. While I'm not saying that solution wouldn't have technically worked, I instead reverted back to mounting the bracket first. This time I laid my monitor flat on the desk, reduced the tension in the shock greatly, and placed it into position that way. At the end when it's complete and setup? It works. It will hold the G8. But just barely. The G8 uses an adapter to go from the monitor mounting points to VESA 100. This adapter sticks out quite a bit from the monitor, which means the weight is further away from the mounting point. Getting the tilt adjustment to hold involved a bigger allen wrench and cranking it further than it seems like it was meant to go. It groaned, but it held. It wants to dip if you mess with it, so I crank it again. Will it one day totally fail on me and point my monitor at my desk? Maybe. But it works on day 1, so that's a start.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 29, 2024
N
Verified Purchase
Nikki05
Pawtucket, US
★★★★★ 5
Holds Backpack Straps Together
Size: 6inches-60PCS
Good quantity for its price. It’s a good quality and durable. I use it to hold my Loungefly backpack straps that I hang on my wall and it does its job perfectly. It’s reusable too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026
R
Verified Purchase
Raniel Nebrida
Los Angeles, US
★★★★★ 5
Perfect for small normal cables lying around.
Size: 6inches-200PCS
Cable ties to organize my random cable is what I needed in my life. The quality is solid and it's easy to use and adjust. They hold well without slipping and the size is perfect for use with normal cables. its about 6 inches long so its gives you a little less than 3inch radius considering they way it is suppose to loop. I think realistically, its more like 2 inch radius. It is versatile and can be reused considering its velcro.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
C
Verified Purchase
CJKA
Battle Creek, US
★★★★★ 5
Perfect Velcro Cable Ties for Everyday Use!
Size: 6inches-60PCS
Great value for good quality Velcro cable ties! These are perfect for your electronic organizer bag or just to organize random loose cables around the house. Hard to tell how long they'll last, but for the price, they are easily replaceable. Highly recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026

recommand products