Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 11 - Jul 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
MONTANA CANS- CRAKLE EFFECTCRACKLE EFFECT for the special crackle look (e. g. for a vintage or used look). Prior coating of your object is necessary with colors of Montana GOLD (recommended) or Montana WHITE (the thicker the base coat the stronger the effect). Give at least 45min but not more than 24hours drying time to the base coat before applying CRACKLE effect (drying time might vary due to temperature, humidity and thickness of coating). Apply spray strokes from left to
CRACKLE EFFECT for the special crackle-look (e.g. for a vintage or used-look). Prior coating of your object is necessary with colors of Montana GOLD (recommended) or Montana WHITE (the thicker the base coat the stronger the effect). Give at least 45min but not more than 24hours drying time to the base coat before applying CRACKLE effect (drying time might vary due to temperature, humidity and thickness of coating). Apply spray strokes from left to right in a crossing over motion (cross-coating) for best results. After extensively applying CRACKLE Effect to your primed area, the distressing (cracking) process will begin to occur. The CRACKLE spray is high-covering and can be top-coated when fully dry and cured (after 24h) with Montana GOLD, Montana BLACK, Montana WHITE, Montana ACRYLIC markers as well as customary acrylic paints. Pre Priming with Montana Styrofoam primer is required for application on polystyrene (make sure to seal the surface completely). Color shown on top or donut.
USE: Recommended working temperature is between +10°C und +25°C. During application, protect the object and the surrounding area from spray mist. Surfaces should be dry, clean of dust, oils and rust before varnish application. Shake can well for 2-3 minutes upside down to take advantage of gravity. Remove the safety ring by removing the nozzle and turning the can upside down allowing it to fall out. To achieve greater crackling effects, further application can be applied after 5 minutes. Always test spray on a non-visible area to check compatibility of lacquer or paint. WWW.MONTANA-CANS.COM/howto
WHAT IS MONTANA CRACKLE 400ML SPRAY AND HOW DOES IT WORK?
MONTANA CRACKLE 400ML SPRAY IS A HIGH PRESSURE GLOSS PAINT COATING, THAT IS APPLIED OVER OTHER PAINTS BEFORE THEY ARE COMPLETELY DRY. THE MONTANA CRACKLE 400ML DRIES AT A FASTER RATE THAN THE PAINT IT IS APPLIED OVER, CREATING CRACKS DURING THE DRYING PROCESS. THE CRACKLE EFFECT IS BOTH AESTHETIC AND CAN MAKES OBJECTS OR ARTWORKS APPEAR VINTAGE OR USED. COLOR SHOWN BY THE DONUT ON TOP OF THE CAN.
HOW DOES MONTANA CRACKLE 400ML SPRAY WORK?
Montana CRACKLE 400ml spray needs to be applied over another paint coating.The best results are achieved over Montana GOLD or WHITE colors. The thicker the base coats applied, the greater the effect. Montana CRACKLE 400ml is best applied between 45 mins and 24 hours after the base color has been applied.
HOW DO I START USING MY MONTANA CRACKLE 400ML SPRAY CAN?
Remove the spray nozzle and turn the can upside down. Strike with your palm allowing safety ring to fall out. Shake vigorously for 2-3 minutes ensuring you can hear the mixing balls moving freely. Replace the cap back onto the top of the can valve and trigger away from substrate to test. If flowing freely you can start painting.
WHICH SURFACES CAN I USE MY CRACKLE 400ML SPRAY ON?
Montana CRACKLE 400ml spray can be used on nearly any primed surfaces such as concrete, metal, wood, walls, hard plastics, primed carton and walls etc. Pre-priming with Montana Styrofoam PRIMER is required before application to polystyrene. Make sure to seal the surface completely ensuring no air holes are open on the foam's surface.
HOW LONG DOES MONTANA CRACKLE 400ML SPRAY TAKE TO DRY?
The drying time for Montana CRACKLE 400ml spray varies depending on the base coat under it, substrate, ambient temperature and levels of humidity. Generally it is possible to be dust dry after 15-20 mins, touch dry in 60 mins and cured after 24 hours.
HOW DO I ACHIEVE THE BEST CRACKS WITH MY MONTANA CRACKLE 400ML SPRAY?
The size and consistency of the cracking varies subject to many variables. Variables like the amount of time application of the Montana CRACKLE 400ml spray to the base coat, the color of the base coat, the contents of the base coat and how evenly (or thick) the Montana CRACKLE 400ml spray was applied. The more evenly and regular it was applied, the more even and consistent the crack formation will be.
WILL THE MONTANA CRACKLE 400ML SPRAY WORK WITH METALLIC COLORS?
Yes, the Montana CRACKLE 400ml spray will work on metallic colors. But the result is not as good as on non metallic colors.
HOW FAR SHOULD I HOLD THE CAN AWAY FROM THE SUBSTRATE WHILE PAINTING?
Optimum distance from substrate is normally between 15 and 25cm depending on your task. Thin, even layers are optimal, applying from left to right in a crossing over motion.
CAN I PAINT OVER MY CRACKLE 400ML WITH OTHER PAINTS?
Yes. You can apply other paints such as Montana GOLD, Montana BLACK, Montana WHITE, Montana ACRYLIC markers as well as customary acrylic paints over the CRACKLE 400ml spray once it is cured. Curing time is 24 or more hours.
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.”
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy