SKU: 51782653857

Walksnail Avatar HD Mini 1s Lite Kit (VTX + Camera)

Sale price$68.83 Regular price$76.48
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Walksnail Avatar HD Mini 1s Lite Kit (VTX + Camera)WARNING Due to the missing heatsync on the Artosyn SOC, please ensure this unit has sufficient cooling airflow when on the bench, any damage to this unit due to overheating will also not be covered under warranty. This is a special release for those extreme whoop pilots who want to save the most possible weight on their drone. Please pay special attention to this. Introducing the Walksnail Avatar Lite HD FPV Kit the ultimate choice for lightweight and

WARNING

Due to the missing heatsync on the Artosyn SOC, please ensure this unit has sufficient cooling/airflow when on the bench, any damage to this unit due to overheating will also not be covered under warranty. This is a special release for those extreme whoop pilots who want to save the most possible weight on their drone. Please pay special attention to this.

Introducing the Walksnail Avatar Lite HD FPV Kit - the ultimate choice for lightweight and high-performance FPV flying. This kit features the new Avatar Lite camera, which boasts an image sensor of 1/2.7" and a resolution of 1080P/60fps, 720P/120fps, 720P/60fps. The lens is 2.1mm with a FOV of 170° and an aperture of F2.0. The camera's minimal plastic design and lack of a back plate make it lighter than ever at only 1.8g, while still maintaining its impressive capabilities.

The kit also includes the Avatar Mini 1S VTX, which has a slimmed down design and weighs in at only 8.5g, making it 3.1g lighter than the original 1S VTX. It uses a whip antenna instead of a circular polarised antenna, and has a communication frequency of 5.725-5.850GHz. The transmitter power is FCC:<25.5dBm, CE:<14dBm, SRRC:<20dBm, and MIC:<25dBm. The I/O interface is JST1.06(Power in)JST1.04(USB) and the dimensions are 30306.5mm.

The kit also includes an IPEX 1S Lite Antenna with linear polarization, a frequency range of 5600-5900MHz, and a gain of 1.6 dBi. The package includes an Avatar Mini 1S Lite Kit, 4 Pin USB Cable, 4 Pin Power Cable, 1.4×8mm Screws, 1.4×10mm Screws, and M2 Anti-vibration Rubber Dampers *6mm. With a weight of only 8.5g and support for Betaflight, this kit is perfect for those who want to take their FPV flying to the next level.

The Walksnail Avatar Lite HD FPV Kit is packed with features that set it apart from the competition. With a resolution of 1080P/60fps, the camera provides crystal clear images even in fast-moving scenarios. The low latency of 22ms ensures that there is minimal delay between the camera and the transmission, providing a seamless FPV experience. The kit is also incredibly lightweight, weighing in at only 7.8g, making it perfect for those who prioritize portability. The Canvas mode allows for easy customization of the on-screen display, and the built-in 8g storage means you'll never have to worry about running out of space to record your flights. The HDMI out feature allows for easy sharing and viewing of your footage, and the wide power input of 3.1-13V and maximum output power of 350mw ensure that the kit can be used with a variety of power sources. The small antenna is a nice touch, as it makes the kit even more portable and easy to transport.

New version of VTX
Avatar HD mini 1S lite kit comes with the smaller, lighter and stronger new version VTX board, 30*30mm size, 5.1g, which can be installed in smaller drones.

Avatar HD lite camera weighs only 1.8g, but with 2.1mm lens and 170°FOV, which can bring you a clearer, more realistic image quality.

High quality, low latency
Weighing only 7.8g, but avatar mini 1s lite kit supports 1080P/60fps, 720P/100fps high definition FPV image quality with a average 22ms ultral-low latency, bring you a beautiful clear 1080P digital FPV video and an unforgettable flying experience.
8G Built-in Storage
The Avatar vtx comes with 8g built-in storage, it can record 1080p or 720p HD and interference-free flight footages without adding an extra SD card and an action camera, reducing the overall weight of the drones and extending the flight time, allowing you to experience a more comfortable flight while recording 1080 HD videos.
Canvas Mode
Supporting Betaflight, kiss, Inav, Ardu full OSD display and customization, you'll be able to customize various OSD fonts, colors and patterns you like and easily adjust the parameters you want via remote control.
3.1-13V input, max 350ms output
The avatar mini 1S lite kit is special designed for 65mm/75mm tiny drones, with 3.1-13V voltage input and 350mw power output, you'll be able to fly all kinds of tinywhoops in a amazing video quality and range.

Specifications

Camera

  • Model: Avatar Lite camera
  • Image Sensor: 1/2.7"
  • Resolution: 1080P/60fps,720P/120fps,720P/60fps
  • Ratio: 16/9; 4/3
  • Lens: 2.1mm
  • FOV: 170°
  • Aperture: F2.0
  • Shutter Rolling: Rolling Shutter
  • Min. Illumination: 0.001Lux
  • Weight: 1.8g
  • Dimensions: 14*14*16mm

VTX

  • Model: Avatar Mini 1S Module
  • Communication Frequency: 5.725-5.850GHz
  • Transmitter Power (EIRP): FCC:<25.5dBm; CE:<14dBm; SRRC:<20dBm; MIC:<25dBm
  • I/O Interface: JST1.0*6(Power in)JST1.0*4(USB)
  • Mounting Holes: 25.5*25.5mm
  • Dimensions: 30*30*6.5mm
  • Storage: 8G
  • Recording: 1080p/720p
  • Weight: 5.1g
  • Operating Temperature: -20-40℃
  • Channels: 8
  • Wide Power Input: 3.1V-13V
  • Maximum Output Power: 350mW
  • Supported FC System: Betaflight
  • OSD: Canvas Mode
  • Bitrate: 25mbps; 50mbps
  • Latency: Average Delay 22ms
  • Antenna: IPEX

1S Lite Antenna

  • Polarization: Linear
  • Frequency Range: 5600-5900MHz
  • GainL 1.6 dBi
  • VSWR: ≤1.5
  • Input Impedance: 50Ω
  • Interface: IPEX-1
  • Size: R 5mm, L 70mm
  • Weight: 0.5g

Included

  • Avatar Mini 1S Lite Kit x1
  • 4 Pin USB Cable x1
  • 4 Pin Power Cable x1
  • 1.4×8mm Screws x4
  • 1.4×10mm Screws x2
  • M2 Anti-vibration Rubber Dampers *6mm x4
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 51782653857

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 1718 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
Ruby
Massapequa, US
★★★★★ 2
Only a glitter
Color: Gold, Size: 3.38 Fl Oz (Pack of 1)
Not as expected It doesnt give any tan/ gold color like the other body shimmers Its only a glitter
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
S
Verified Purchase
Stephanie Rager
San Leandro, US
★★★★★ 5
Good For Heavy Chewers So Far
Color: Onyx Black - Most Durable
Solid quality. My Doberman is a power chewer and I am looking for a toy that he can't destroy in 2 seconds. If a ball lasts more than an hour it is a miracle. It has a sturdy design and is more heavy weight than the other "non-destructible" balls he has. He has only had his ball for one day so we will see how long this ball lasts him. It is the size of a tennis ball, firm, little to no bounce, and seems built for heavy chewing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 30, 2026
S
Verified Purchase
Scott Gromaski
Dallas, US
★★★★★ 5
Great Product, 2 years and running!
Color: Onyx Black - Most Durable
It’s been almost 2 years and my dogs haven’t destroyed them yet. I have a Pitbull and a Pit/Cosro mix. They destroy every toy we’ve given them, except these toys. Great product 100% worth the money
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 29, 2026
T
Verified Purchase
Tony Ahearn
Bozeman, US
★★★★★ 5
Perfect for HEAVY chewers
Color: Onyx Black - Most Durable
My dog is a heavy chewer. Destroys everything that’s not very hard rubber, hard plastic, or hard material. He LOVES this ball. I think it’s his favorite. Plus, it bounces great so you can play with your dog. Very well constructed- probably indestructible or will at least last a very long time. Easily worth the money.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 7, 2026
E
Verified Purchase
Evan J.
Charlottesville, US
★★★★★ 5
The only toy my dogs can’t destroy and love
Color: Onyx Black - Most Durable
I am thrilled to have found one toy my dogs don’t destroy immediately. They have torn up Fenrir hammers, the black kongs of all sizes, the monster k9 stick, nylabones, and they don’t like the goughnut at all (it stinks like a bad tire). This is the first one they both love and haven’t been able to destroy immediately. It does allow little tooth marks, but that’s what makes it fun for them. They are very happy playing with it and I’d say this one was worth every dollar. Update Months Later: We’ve gone through 2/3 now. I got two initially, and one has lasted long term. They still haven’t completely destroyed it. They did destroy a second one quickly so I suspect a flaw in it. They sent me a new one and they took a while, but they did destroy the third to the point we had to throw it away. Despite that, one still remains and our dogs still love it. It’s still the best for the money compared to others. We have two Bully XL’s that are each close to 100 pounds.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 11, 2024

recommand products