TheFPV Build It Kit - AOS.RC High Speed Drone (HS5) w/ DJI O4 PRO

TheFPV Build It Kit - AOS.RC High Speed Drone (HS5) w/ DJI O4 PROAOS HS5 Drone Frame Kit: Unleash Speed and Precision in FPV Flight Step into high speed, high precision FPV with the AOS HS5 Drone Frame Kit, the pinnacle of aerodynamic efficiency. Crafted with aerospace grade carbon fiber and PETG outer shells, the HS5 is engineered to minimize drag, enabling stunning acceleration and effortless top speeds that redefine what a 5" drone can achieve. This frame isn't just fastit's laser focused on precision, with its

AOS HS5 Drone Frame Kit: Unleash Speed and Precision in FPV Flight

Step into high-speed, high-precision FPV with the AOS HS5 Drone Frame Kit, the pinnacle of aerodynamic efficiency. Crafted with aerospace-grade carbon fiber and PETG outer shells, the HS5 is engineered to minimize drag, enabling stunning acceleration and effortless top speeds that redefine what a 5" drone can achieve. This frame isn't just fast—it's laser-focused on precision, with its CFD-optimized design offering unmatched control and razor-sharp responsiveness in turns.

Designed for FPV enthusiasts and professionals alike, the AOS HS5 frame ensures smooth, stabilized footage even at high velocity, making it the go-to choice for filming motorsports, high-speed chases, and dynamic aerial scenes. Its wide compatibility means it's easy to build and highly customizable, accommodating various FPV components, cameras, and batteries. The AOS HS5 offers ultimate versatility in drone configuration, whether you're looking to start easy with a 30° uptilt or push boundaries with a 90° setup.

1. Easy to build : The AOS HS5 is designed to be an incredibly easy and user-friendly FPV frame to build. The front shell has space and a place for every component: your Camera, VTX, Receiver, Antennas, and Electronics stack are all contained inside.
2. Easy to fly : A simple twist locks and unlocks the rear shell for easy battery swaps. Cutouts allow access to the USB ports of the VTX and flight controller as well as providing essential cooling for the ESC. The rear shell only contains the battery, making it straightforward to change packs without disturbing any of your electronics.Start slow with your usual 30-degree camera uptilt and work up to ultra-high-speed runs with up to 90 degrees of camera uptilt.
3. Advanced Aerodynamic Design : The aerodynamic shells of the AOS HS5 have been optimized with the use of CFD tools to minimize drag at high speeds. Tail fins add aerodynamic stability for smooth footage. Aerodynamic spinners for the props reduce the motors' drag.
4. Immersive 155° FPV Experience : Immerse yourself in the action with a full 155-degree field of view (FOV) for the FPV camera—no props in view. This expansive view is perfect for DJI O4 Pro users and guarantees an immersive flight experience for both professionals and enthusiasts. ND filters for the O4 Pro Camera are fully supported.

Accelerate your FPV experience with the AOS HS5. Designed to deliver the ultimate in high-speed 5" performance, it's the perfect choice for professionals creating the fastest, most dynamic FPV footage and high-speed FPV drone enthusiasts. Upgrade to the AOS HS5 and take your FPV experience supersonic (or at least until the next big update).

Key Features

• Engineered for Speed : Aerodynamic shells and tail fins minimize drag and enhance stability for seamless footage and peak velocity.
• 155° FPV Field of View : Expansive FOV with no prop interference, perfect for DJI O4 Pro users seeking an immersive experience.
• Quick Battery Access : Twist-to-unlock rear shell for fast battery swaps and open cutouts for easy USB access.
• Modular Design : Front shell provides dedicated compartments for Camera, VTX, Receiver, Antennas, and Electronics stack.

Specifications

• Supports up to 6" Props (Recommend HQ 5.3X8)
• Supports 30.5 mm Electronics Stacks
• Supports all popular Digital and Analog VTX
• 155° FOV, no props in view (at typical high-speed camera uptilt)
• Fully DJI O4 Pro compatible (ND filters)
• Supports 19 - 20 mm camera
• Supports up to 1800mAh 6S Batteries (90 x 40 x 55 mm)
• ⌀16 - ⌀19 mm motor mounting (2808 1950KV Recommended)

The parts list is as follows:

• Frame: AOS.RC HS5 Frame Kit
• Flight Stack (Flight Controller + ESC(AM32 REady)): DYS F7 Stack F722 FC 65A 8S AM32 30×30
• Motors: EMAX Pro 2808 Cinelifter Motor
• Receiver: Happymodel EP1 TCXO ELRS Reciever 2.4Ghz
• Propellers CCW: HQProp Thin Electric Prop 5.3X8 (2CCW)
• Propellers CW: HQProp Thin Electric Prop 5.3X8R (2CW)
• Digital Video Transmitter and Camera : DJI O4 Pro Air Unit FPV System
• GPS: Flywoo GOKU GM10 Mini V3 GPS

Note on Hardware.

We have had a number of request from clients regarding hardware for this frame, so we have gone ahead, and included all the hardware necessary to build the frame itself, mount motors and mount camera (DJI O3 or O4 Pro).

Additionally we have included M2 and M3 washers if so required and also countersunk bolts if you would like to further secure the two fuselage halves together. Chris mentiones this is not strictly necessary but the option is there if you choose.

The following hardware is included in your kit:

● M2 X 4mm countersunk hex bolt (QTY5)

● M2 X 6mm hex bolt (QTY5)

● M2 X 8mm hex bolt (QTY5)

● M2 nut (QTY5)

● M2 washer (QTY5)

● M3 Washer (QTY5)

● M3 X15mm standoff black knurled (QTY3)

● M3 X 30mm standoff black knurled (QTY3)

● M3 X 8mm countersunk hex (QTY5)

● M3 X 10mm hex bolt (QTY15)

● M3 X 12mm hex bolt (QTY15)

● M3 X 25mm hex bolt (QTY10)

● M3 X30mm hex bolt (QTY10)

Hope this helps!

You can also use this parts list as guide if you want to tweak this kit to your own liking.

This is our recommendation, but FPV is about expression and exploration so make it your own!

If you don't already have the rest, we recommend the following to get started:

• Battery: Tattu 1300mAh 8S 130C 29.6V R-Line Version 4.0 Lipo Battery Pack With XT60 Plug 
  
• Charger :  SkyRC B6 Neo Charger (Single Channel) OR SkyRC D100 Neo 2-6S Charger (Dual Channel)
• Charger Adapter: Charger Adapter Cable
• Radio : Radiomaster Pocket (ELRS, NOT CC2500) 
•  Radio Alternative:  DJI RC3 ( NOTE : If using this radio, do not install the ELRS receiver, and ensure that all O3 signal wires are connected to the flight controller)
• Goggles : DJI Goggles 3  , DJI Goggles N3

Suggested Tools

If you don't have any tools, this is what we suggest:

• UMT FPV Drone Tool Kit with Case (10pc) OR TheFPV 18pc Drone Tool Kit
• Sequre SQ-001 65W Portable Soldering Iron Kit OR UMT 80W Soldering Iron Kit with M900 Compatible Tips
• DroneBuildr Zip Tie / Cable Tie (Pack Of 20)
• DroneBuildr Wire Mesh Paracord Cable Sleeve (for your motor wires)
• Vifly ShortSaver 2 Smart Smoke Stopper
• DroneBuildr 100pcs 10cm Heat Shrink Tube Kit

Note: Accessory pack contents may vary based on supply availability.