Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Square Edge Plasterboard x 12.5mmSquare edge plasterboard 12. 5mm is the standard general purpose board for internal walls and ceilings in domestic and commercial builds. Featuring an aerated gypsum core with bound paper liners, it complies with BS EN 520: 2004+A1: 2009 Type A and is available in two sheet sizes. Specifications Material Aerated gypsum core with paper liners Grade BS EN 520: 2004+A1: 2009 Type A (general purpose) Thickness 12. 5mm Sizes Available 2400mm x 1200mm
Square edge plasterboard 12.5mm is the standard general-purpose board for internal walls and ceilings in domestic and commercial builds. Featuring an aerated gypsum core with bound paper liners, it complies with BS EN 520:2004+A1:2009 Type A and is available in two sheet sizes.
Specifications
| Material | Aerated gypsum core with paper liners |
|---|---|
| Grade | BS EN 520:2004+A1:2009 Type A (general purpose) |
| Thickness | 12.5mm |
| Sizes Available | 2400mm x 1200mm / 1800mm x 900mm |
| Profile | Square edge |
| Finish | Paper-faced, suitable for skim coat, textured finish, or direct decoration |
| Use | Internal walls and ceilings only |
What it's used for
- Lining internal stud partition walls in new builds and refurbishments
- Fixing to ceiling joists as a base for skim plaster or textured coatings
- Dot and dab application direct to masonry walls as a dry lining solution
- Infill panels within metal frame systems in commercial fit-out work
Fitting and handling
Store boards flat and off the ground in a dry, ventilated space before installation, keeping them away from damp conditions which can cause the core to soften. Fix to timber studs or metal framing at no more than 600mm centres using appropriate drywall screws, or use a suitable bonding compound for dot and dab to masonry. Once fixed, fill screw heads and joints with jointing compound before applying a skim coat or finish of your choice.
FAQ
What is the difference between square edge and tapered edge plasterboard?
Square edge board has flat, unrecessed edges on all four sides and is designed for use where the full surface will receive a skim coat of finish plaster. Tapered edge board has recessed long edges so that jointing tape and compound can be feathered flush for a seamless, paint-ready surface without full skimming.
Can 12.5mm plasterboard be used on ceilings?
Yes. 12.5mm is a standard thickness for ceilings where joist centres are at 400mm or 600mm. For spans beyond 600mm or where additional acoustic or fire performance is needed, a thicker board or a specialist product should be specified instead.
How do I cut plasterboard cleanly on site?
Score firmly through the paper face with a sharp knife and straightedge, then snap the board away from you over the scored line. Run the knife along the back paper to separate the cut. A plasterboard saw can be used for internal cuts and cut-outs around sockets or switches.
For other sheet materials to complete your build, browse the MDF sheets range at Nottage Timber Merchants. We supply trade and self-build customers across Bridgend and South Wales, with next-day delivery available to many local postcodes.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy