STM32 Programming adapter STM32F STM32L QFP48 test socket

STM32 Programming adapter STM32F STM32L QFP48 test socketSTM32 QFP48 test socket, is designed for STM32 QFP48 chip testing, programming, STM32 Programming adapter STM32F STM32L QFP48 test socket. Features: socket: 7X7MM pin: 9X9MM pitch: 0. 5MM Applicable models STM32 QFP48 package : STM32F10xC series ( eg : STM32F103CB, STM32F103C8) STM32L15xC series ( eg : STM32L151C6, STM32L152CB) Feature To pin all the way to the chip lead pin , pin spacing of 2. 54mm (100mil) Onboard JTAG, SWD, USART1 interface, can be

STM32 QFP48 test socket, is designed for STM32-QFP48 chip testing, programming, STM32 Programming adapter STM32F STM32L QFP48 test socket.

Features:
socket: 7X7MM 
pin: 9X9MM 
pitch: 0.5MM 

Applicable models    STM32 QFP48 package :

    STM32F10xC series ( eg : STM32F103CB, STM32F103C8)    
    STM32L15xC series ( eg : STM32L151C6, STM32L152CB)    

Feature        

    To pin all the way to the chip lead pin , pin spacing of 2.54mm (100mil)    
    Onboard JTAG, SWD, USART1 interface, can be directly related to model testing, programming    
    On-board high-speed external crystal socket ( crystal can be customized )    
    Onboard low-speed external crystal (32.768K)    
    Onboard two LED, can be used to test the status indication ( can jump jumper , do not take up I / O resources )    
        

[STM32-QFP48 special test stand Profile ]    

    JTAG / SWD Interface
    Compatible with ST-LINK / J-LINK / ULINK2 / STX-RLINK    
    USART1 Interface
    Available for download or ISP serial debugging information    
    LED
    Status indication can be used to test    
    MCU pin header
    For pin identification , facilitate testing    
    BOOT0/BOOT1 jumper
    By jumper selection, using three kinds of startup mode startup STM32    
    5V power input interface
    2PIN circular interface or via a 5V power supply interface access    
    Crystal Jack
    Access to both sides of the hole ( the middle hole vacant )    
    Power LED
    LED jumper port
    Short : You can use the LED status indication for testing , take I / O
    Jump : Do not use the LED status indication for testing , do not take up I / O    
    32.768K crystal (PCB back )
    Available using the built-in RTC , or for calibration.    
    3.3V regulator chip (PCB back )
    Onboard AMS1117-3.3