SKU: 13219572391

BetaFPV F4 1S 12A AIO Brushless Flight Controller (Built in RX)

Sale price$30.60 Regular price$34.00
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

BetaFPV F4 1S 12A AIO Brushless Flight Controller (Built in RX)Are you looking to buy a BetaFPV F4 1S 12A AIO Brushless Flight Controller in Australia? F4 1S 12A AIO Flight Controller A 1S 12A FC for building lightweight 3" toothpick drones like HX115 SE Toothpick Drone. If you want to try a bigger FPV drone than 65mm 75mm on 1S power, and still want smooth and powerful flying actions, this FC that integrates 1S 12A ESC is definitely your best choice. F4 1S 12A AIO Flight Controller is the best choice for

Are you looking to buy a BetaFPV F4 1S 12A AIO Brushless Flight Controller in Australia?

F4 1S 12A AIO Flight Controller - A 1S 12A FC for building lightweight 3" toothpick drones like HX115 SE Toothpick Drone. If you want to try a bigger FPV drone than 65mm/75mm on 1S power, and still want smooth and powerful flying actions, this FC that integrates 1S 12A ESC is definitely your best choice.

  • F4 1S 12A AIO Flight Controller is the best choice for building ultra-lightweight 3" toothpick drones like HX115 SE FPV Quad.
  • Most of 1S flight controllers on the market come with 5A ESC by now, but this FC especially integrates 1S 12A ESC, it can provide more sufficient power for 3" toothpick drones.
  • Built-in current meter, 2 programmable RGB LEDs, and SPI Frsky receiver. At the same time, all the pads are left for the external receivers with UART1 and UART2, for buzzers, etc.
  • Whoop mounting hole pattern, be compatible with most 1S 3" frame. Large pads are reserved for solder motor cables, this design will make solder easier.

Specification of FC

  • Item: F4 1S 12A AIO FC (Frsky)
  • Weight: 4.74 g (without power cable and BT2.0 connector)
  • CPU: STM32F411CEU6 (100MHZ )
  • Six-Axis: MPU6000 (SPI connection)
  • Firmware version: betaflight_4.2.0_STM32F411
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • Receiver: Intergrated SPI Frsky Receiver / Futaba Receiver
  • Motor Pin Connecter: 1.25mm Header Pins
  • Mounting Hole Size: 29mm x 29mm (suitable for whoop pattern mounting hole)
  • USB Port: Type-C

Specification of 1S 12A ESC

  • Built-in ESC with 12A continuous and peak 25A current
  • Input voltage: 1S Lipo
  • ESC firmware: Z_H_30_REV16_7.HEX
  • Signal support: D-shot150, D- shot300, D-shot600, Oneshot125, Multishot, PWM

This new BLHeli_S firmware (named Z_H_30_REV16_7.HEX) is supported by BLHeli Configurator, BLHeliSuite, and Bluejay Configurator.

Diagram for F4 1S 12A AIO FC

UART1, UART2, and SBUS pads are left for external receivers like Frsky XM+, TBS Nano receiver so that a long receiver range is available.

Buzz pads (BUZZ+ and BUZZ-) are invalid directly. It needs some modification to make it works.

The current meter is integrated on the FC board. Here is the configuration in Betaflight Configurator.

12A 1S ESC

Should we really need a 12A ESC for 1S drones? If it is a 65mm or 75mm Whoop drone like Meteor65, 5A ESC is enough for all actions. But how about with 3" propellers and 1102/1202.5 motors? Still want smooth and powerful flying actions? The 5A ESC has developed about 3 years ago and designed for whoop drones with 0603/0802 motors. For the past year, BETAFPV team has been cooperating with BLHeli author Steffen on the 12A 1S ESC for 3" toothpick drones. Finally, it is here!

It marks "1-2S" on the board, could this FC board support 2S?

NOT Yet. The motor spins not smoothly in 2S power with the released ESC firmware. We will work on it continuously and make this board support 2S later. If you have any ideas or advice, feel free to contact us.

SPI Frsky RX

Come with the build-in SPI Frsky Receiver (CC2500 chip), F4 1S 12A AIO FC can be compatible with Futaba S-FHSS, Frsky D8, and D16 protocol. The default protocol is configured to Frsky D16 FCC out of the factory. Pilots could set up the protocol according to your own need in Betaflight Configurator.

Configuration

Protocol

FRSKY_D

Frsky D8

FRSKY_X

Frsky D16 FCC (ACCST 1.X version)

FRSKY_X_LBT

Frsky D16 LBT (ACCST 1.X version)

SFHSS

Futaba S-FHSS

Package Includes

  • 1 * F4 1S 12A AIO FC (Frsky)
  • 4 * Anti-vibration rubber dampers
  • 4 * M2 x 10mm screws
  • 4 * M2 x 10mm screws
  • 8 * M2 screw nut

Browse more

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 13219572391

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 1852 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Jennifer Peterson
Pawtucket, US
★★★★★ 5
Great value
Size: 12, Color: All Black
I have 3 pairs of these shoes. They are super comfy. The price is amazing for a shoe so well built. They are light weight look really nice on. Buy them, well worth the money.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026
D
Verified Purchase
D. Smith
Port Orchard, US
★★★★★ 5
Worth the price
Size: 10, Color: White
Stylish and comfortable
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
P
Verified Purchase
PizzaTheHutt
Cuba, US
★★★★★ 1
Avoid These Shoes
Size: 10, Color: Grey
The pair I received (gray) was not represented well in their photos. Mine had a lime green logo which looks silly. They also bunch up very badly when you pull the laces which looks ridiculous. Cheap feeling and look bad when tied. Sending back
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 6, 2026
D
Verified Purchase
dennis dolinsky
Grantham, US
★★★★★ 5
Great fit, great looking
Size: 11, Color: Red
Great looking, great fit, 5 Stars
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 28, 2026
T
Verified Purchase
TojoAkuma
Louisville, US
★★★★★ 5
Great pair of shoes
Size: 10, Color: Burgundy
I was a bit concerned that these shoes would be a bit large because I normally wear a size 9 1/2 and these are a size 10. But they fit perfectly. They are very light and comfortable. 👍
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 10, 2026

recommand products