Oak Firecheck Glazing Bead Hockey Stick 23mm x 26mm x 2400mm

Oak Firecheck Glazing Bead Hockey Stick 23mm x 26mm x 2400mmOak firecheck glazing bead in a hockey stick profile, 23mm x 26mm x 2400mm, is designed to retain glass panels within fire door assemblies. The shaped rebate holds glazing firmly while providing a clean hardwood finish that complements both stained and painted fire door sets. Specifications Property Detail Material Oak hardwood Nominal Size 23mm x 26mm Length 2400mm Profile Hockey stick (cushion corner angle) Use Fire door glazing bead What it's used

Oak firecheck glazing bead in a hockey stick profile, 23mm x 26mm x 2400mm, is designed to retain glass panels within fire door assemblies. The shaped rebate holds glazing firmly while providing a clean hardwood finish that complements both stained and painted fire door sets.

Specifications

What it's used for

• Retaining glass panels in oak fire doors, including FD30 and FD60 rated sets
• Framing vision panels in internal fire doors across commercial, office and residential projects
• Replacing worn or damaged glazing beads on existing hardwood fire door frames
• Matching surrounding oak door linings and architraves for a consistent finish

Fitting and handling

Allow the bead to acclimatise in the room where it will be fitted for at least 48 hours before fixing, particularly in heated interiors, to minimise movement after installation. Fix using a fire-rated adhesive or hardened pins, ensuring the bead seats flush against the glass rebate with no gaps that could compromise the integrity of the fire door assembly. Finish with a compatible oil, stain or paint once fitted, and store any unused lengths flat and off the ground in a dry environment to prevent distortion.

FAQ

Is this glazing bead suitable for FD30 fire doors?

This bead is manufactured as a firecheck glazing bead for use on fire door assemblies. You should always verify compatibility with the specific door manufacturer's certification and, if required, consult a fire door specialist to confirm the complete assembly meets the relevant fire rating standard.

Can I paint or stain this oak glazing bead?

Yes. Oak accepts oil, stain and paint finishes well. Lightly sand the surface before applying your chosen finish, and use a product suitable for hardwood to achieve an even, durable result.

How many lengths do I need for a standard fire door vision panel?

A typical vision panel will require four cut lengths from one or two 2400mm sticks depending on panel size. Measure the perimeter of your glass aperture, add a small allowance for mitre cuts, and round up to the nearest full length to avoid short measure.

Browse the full range of oak mouldings at Nottage Timber Merchants, including matching architraves, door stops and cover beads. We supply trade and retail customers across South Wales, with next-day delivery available to the Bridgend area and surrounding regions.