Suitable for interior and exterior use, e.g. car parks, tennis courts, factories, warehouses, gymnasiums, schools, etc. Can be used on asphalt, concrete, wood composites, gravel and grass.

Preparation

Ensure all surfaces are clean, dry and free from grease or oil or any other contaminants that may hinder adhesion.

How To Use

• For best results use in conjunction with a marking applicator.
• Shake the can for at least 1 minute after the agitator balls are heard rattling.
• Shake frequently during use.
• After use clear the valve ready for storage by spraying in an upright position for 1-2 seconds ensuring the nozzle is pointing AWAY from people and surfaces.
• Remove the nozzle and store vertically.
• If the can is to be stored for longer than 1 month the can should be stored horizontally.
• In windy conditions, care must be taken to avoid overspray.

Drying Time
Bond It LINE-IT PAINT is fast drying. Drying times are dependent on the temperature at which it is applied, for best results the temperature should be above 10C. Normally LINE-IT PAINT should be touch dry and ready to receive light traffic after 30 minutes. For heavy traffic leave for 2 hours. Drying times are dependant on temperature and the moisture content of the substrate.

Coverage
One 750ml can yield a line of 60m to 100m (200 to 350ft) of 50mm (2”) width, depending on application weight.

Colour
LINE-IT PAINT comes in 7 colours: yellow, white, red, blue, green, orange and black 750ml can. 500ml
available in white and yellow only.