Libec LX10 Two-Stage Aluminum Tripod System and H65B Head and Ground-Level Spreader & padded bag
SKU: 73515098461

Libec LX10 Two-Stage Aluminum Tripod System and H65B Head and Ground-Level Spreader & padded bag

$20170.08 $22411.20
Save 10%
No.2 Bestseller on sylv1net.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 7 - Jul 12

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Libec LX10 Two-Stage Aluminum Tripod System and H65B Head and Ground-Level Spreader & padded bagThis setup serves as Libec's definitive, high capacity 100mm bowl aluminum production tripod. It is engineered as a highly stable workhorse system for Electronic News Gathering (ENG) teams, multi camera live events, and commercial film sets operating fully rigged cinema packages or teleprompter configurations weighing up to a maximum system payload of 16. 0 kg (35. 0 lbs). Core Component Breakdown & Structural Design 1. The Core: Libec H65B 100mm

This setup serves as Libec's definitive, high-capacity 100mm bowl aluminum production tripod. It is engineered as a highly stable workhorse system for Electronic News Gathering (ENG) teams, multi-camera live events, and commercial film sets operating fully rigged cinema packages or teleprompter configurations weighing up to a maximum system payload of 16.0 kg (35.0 lbs).

Core Component Breakdown & Structural Design

1. The Core: Libec H65B 100mm Fluid Head

  • Heavy Capacity Fixed Balance: To optimize setup speeds during fast-moving field productions, the head integrates a precisely tensioned internal spring counterbalance curve. It is calibrated to handle mid-sized camera packages smoothly, ensuring your system remains balanced without tilting unexpectedly when you let go of the pan bar.

  • Two-Step Fluid Torque Profile: The head houses a physical mechanical drag switch, letting you shift between distinct levels of fluid dampening. This allows camera operators to change panning resistance on the fly when switching from rapid action tracking to slow, deliberate cinematic framing.

  • All-Weather Resilience: The proprietary silicone grease inside the drag modules remains functionally consistent across a temperature spectrum running from negative 20 degrees Celsius to positive 60 degrees Celsius (negative 4 degrees Fahrenheit to positive 140 degrees Fahrenheit).

2. Low Center-of-Gravity Stance: RT50B Aluminum Legs & SP-6B Floor Spreader

  • Double-Tube Two-Stage Framing: The tripod legs utilize high-strength aluminum alloy pipelines configured with a dual-strut profile on the upper and mid stages. This double-tube geometry provides outstanding torsional stiffness, meaning the tripod legs will resist twisting out of line when executing rapid panoramic camera strokes.

  • Ground Spreader Advantage: By utilizing the SP-6B Floor Spreader, the legs link together at the lowest physical contact point on the floor. This layout significantly drops the system's center of gravity and prevents leg splay on slick, hard surfaces like polished studio floors, event venue stages, or concrete pads. The independent telescoping sections on the spreader arms allow you to broaden the footprint, dropping the camera down to a minimum operating height of 63.0 cm (24.8 inches).

3. Balancing & Travel Accessories

  • Extended Sliding Tracking: The camera platform incorporates a long sliding quick-release plate with an active travel window of plus or minus 50mm (plus or minus 2.0 inches) forward or back of center. This extended range makes balancing rigs with front-heavy matte boxes or rear-heavy wireless receivers straightforward.

  • RC-50 Padded Travel Bag: A high-durability, water-resistant zippered transport case equipped with internal shock absorption padding and an interior pocket to protect your investment during shipping.

System Technical Specifications Matrix:

Performance Parameter Libec LX10 Ground Spreader System Specifications
Official System Package SKU Libec LX10 (Also designated as LX-10)
Maximum Total System Payload 16.0 kg / 35.0 lbs (Fluid head + camera package combined)
Head Mounting Interface Type Industry-Standard 100mm Diameter Bowl
Pan and Tilt Drag Profiles 2-Step Mechanical Real Fluid Drag System
Tilt Angle Capabilities Positive 85 degrees to negative 65 degrees
System Height Operating Range 63.0 cm to 173.5 cm / 24.8 inches to 68.3 inches (Achieves a lower low-angle stance than the mid-spreader configuration)
Padded Transport Case SKU Libec RC-50 Heavy-Duty Padded Carrying Bag
Total Net Hardware Weight 7.6 kg / 16.7 lbs (Head, Legs, and Floor Spreader combined)

Operational System Tips for the LX10:

💡 The Flat Ground Boundary: The floor spreader is phenomenal for flat studio environments, concrete surfaces, or carpeted event spaces. However, if you are forced to shoot outdoors on steps, steep hillsides, or rough mud, a floor spreader can flex out of parallel alignment and stress the leg locks. For rugged terrain, simply detach the floor spreader from the leg pins and rely on the integrated spiked feet to bite firmly into the earth.

  • Quarter-Turn Leg Securing: The aluminum die-cast leg-lock knobs are engineered for high-speed adjustments. You do not need to spin them repeatedly to secure the stages; a rapid quarter-turn or half-turn yields immense clamping force capable of locking down a heavy 16.0 kg setup with zero vertical slippage.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 73515098461

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 1606 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Computer
Cuba, US
★★★★★ 4
Easy to assemble, does the job, material is shiny nylon and shows creases, minor defects, sloppy
Size: 3 Panel 12FT W, Size: 3 Panel 12FT W
The Siebwin room divider is a good idea, and for the price, it mostly delivers on the intended functionality. I ordered the 12 foot, 3-panel version mainly to hide an unfinished basement storage area that had become an eyesore. It works well for that purpose and gives the space a cleaner appearance without spending the kind of money that more decorative dividers or custom partitions cost. If you need something temporary, portable, or mainly functional, this is a viable option. There are a few limitations that became obvious during setup and use. The first thing I noticed was that the weld quality on some of the metal poles is fairly sloppy. Once the cover is installed, you do not really see it, but up close, it does not look especially refined or professional. The blackout material also is not a matte canvas style fabric as I expected. It has more of a shiny nylon appearance, and the creases are fairly visible. Being that it’s more of a nylon, I’d be hesitant to try steaming it to remove the creases. However, the creases do not matter if you are using it in a basement, dorm, or shared room, but for photography, video work, or a professional office setting, the appearance could be disappointing. The fabric is thick enough, though. It blocks visibility well enough, but strong light behind it still shows through to some extent, nothing deal-breaking. Also, my fabric appeared to be slightly defective. The hook and loop strip on one of the bottom sections was off-center and couldn't be totally attached because it was lined up with one of the legs. I originally hoped to use this as a video backdrop, but I will probably end up replacing the fabric with a proper green screen or canvas material while continuing to use the frame itself. For now, it does a good job of covering my basement junk. Assembly was actually easier than I expected and took roughly 15 to 20 minutes. The longer vertical poles are tethered together similarly to tent poles, which made setup straightforward and fairly intuitive. The shorter horizontal pieces slide and snap together to the top and bottom of the vertical assembly. After each section is assembled, the divider panels connect together with metal plates and two knurled screws (at the top and bottom), so no tools are really required. A few screws were difficult to start because paint had gotten into the threads, but once they caught, they tightened down normally. The feet install with similar knurled fasteners and help keep the divider reasonably stable. One thing to watch for during setup is the fabric orientation. There is one arrow indicator in the middle of the fabric to indicate up. However, if you need another indicator, the smaller hook and loop strip goes on the bottom while the longer strip goes on top. I realized mine was upside down right before finishing and had to redo it. I wasn't difficult to redo, despite the defect in mine. The overall design is practical and easy to move around. I do like that the panels can fold and bend into different shapes depending on the space. The widened feet help stability, although when trying to stretch the fabric tight, I noticed the poles sometimes wanted to overlap slightly at the joints. Tightening everything helped somewhat, but it still happened occasionally. The divider feels adequate for normal indoor use, though I would not expect premium durability or luxury-level fit and finish at this price point. The entire device can also be easily disabled and stored in a tote if you need it completely out of the way. It comes with assembly instructions, but even if you didn’t have them, it’s easy to build without them (save a mistake or two). In terms of value, I think the Siebwin divider mostly matches its price. Around $100 gets you a large freestanding partition with decent usability and easy assembly, but there are compromises in materials, appearance, and refinement. The defects are also off-putting, but hopefully you won't have them. Higher-end room dividers can easily cost two or three times more, so some of the tradeoffs are expected. I also noticed cheaper alternatives online, but based on the quality here, I suspect those would probably have even more issues. For practical home use, temporary privacy, hiding storage areas, or separating shared spaces, this is a good option as long as expectations stay realistic.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
T
Trendy Tales
Whiting, US
★★★★★ 3
Works well but takes up more space than expected
Size: 2 Panel 8FT W, Size: 2 Panel 8FT W
This room divider does the job for creating a little extra privacy and was easy enough to set up. The panels feel decent quality and the wider feet help keep it more stable than some cheaper screens I’ve tried. My only issue is that it takes up a bit more room than I expected, especially with the feet sticking out. It’s still portable and folds away nicely, but definitely measure your space first. Overall it works well for separating a room or blocking off an area temporarily. i wish it came in other colors
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
K
Katrina Rhodes
Boise, US
★★★★★ 5
Nice divider, serves it's purpose well!
Size: 3 Panel 12FT W
This room divider worked out very well for what I needed. I wanted a simple way to create a little more privacy and separation in a larger room without doing anything permanent, and this divider was an easy solution. The panels provide good coverage, and the black color gives it a clean, modern appearance that blends in nicely with different décor styles. Assembly was fairly straightforward, and once set up, the wider feet helped keep the divider stable on the floor. I was especially happy with how flexible the panels are to arrange. You can keep it mostly straight, angle it around furniture, or create a more enclosed private space depending on the layout you need. The material allows light to filter through slightly while still offering a noticeable sense of privacy. I’ve used it for separating a workspace area, but it would also work well in bedrooms, apartments, dorms, studios, or shared living spaces. Another plus is that it can be folded and moved without too much effort when you want to change the setup. Overall, this divider delivers a good balance of functionality, portability, and appearance. It’s a practical option for anyone needing temporary room separation without installing permanent walls or curtains.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
J
Jamie K.
Birmingham, US
★★★★★ 5
Perfect for Adding Privacy to a Piano Studio
Size: 2 Panel 8FT W, Size: 2 Panel 8FT W
I Ordered the 2 Panel version which is way too big for my needs... that's on me. So keep in mind that the picture shows a fabric made for two panels only being used on one and hence it is not pulled tight; it would pull tight and not be so wrinkly if it was set up properly as two panels. The metal pools that make up the panels seem to be well made, stable, and of good quality. They were very easy to put together and they stand up tall with plenty of height. The appearance of it with the fabric on it isn't as elegant as it could be, but it still looks good enough. The material is plenty solid, not allowing light through it, and thereby making a solid barrier. I am using it to block the view out the studio door when a student is sitting at the piano to avoid distractions from the hallway. It will allow a student to enter the studio with our distracting the student who is at the piano.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
J
Just Me
Charlottesville, US
★★★★★ 5
Room Divider That Gives Instant “This Is a Separate Space Now” Energy
Size: 3 Panel 12FT W
The Siebwin 3 Panel Folding Privacy Screen is surprisingly effective at changing the feel of a room without requiring construction, commitment, or somebody yelling about load bearing walls. The 12 foot width gives a substantial amount of coverage, making it useful for creating privacy, dividing open areas, blocking visual clutter, or setting up temporary sections within larger rooms. This saved us a ton of time and money in our new studio and enabled us to create a kitchen and office in one room. The wider feet make a huge difference because flimsy room dividers that collapse every time someone exhales too aggressively are deeply annoying. This one feels more stable and grounded once positioned. The folding design makes it easy to move around or adjust depending on the space, and it folds down relatively compactly when not in use. It is basically the introvert curtain wall of dreams. The material has a clean, neutral look that blends well into different room styles without screaming “temporary office cubicle panic.” It works well for apartments, studios, shared spaces, dressing areas, or simply hiding the mountain of chaos you swear you are going to organize tomorrow. Practical, portable, and refreshingly easy to use without turning setup into a three hour emotional event.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026

recommand products

OR76J26003 Bundle with 2 x Pilchard Wagons
149.95
Oxford Rail CR Class 264/611 - BR Early Crest Lined Black 56025
182.25
Hello Beautiful Shirt
20.00
Oxford Diecast Messerschmitt ME163 1A White 14 Jg400 Brandis 1945 No Swastika 1:72 Scale
22.95
Oxford Rail Rail Gun WWII Scene-Shifter
116.62