Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 11 - Jul 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Apollo 1 in. x 100 ft. Blue PEX-A Expansion Pipe1 in. x 100 ft. Blue PEX A Pipe (Blue) Durable, flexible PEX A expansion pipe for potable water systems. Designed for maximum flow and fewer leak points, this blue tubing clearly identifies cold water runs and resists coil memory for easier installs. Key Features: PEX A Flexibility: Bends easily to reduce fittings and potential leak points Full Flow Design: Larger ID helps maximize water output Cold Water Identification: Blue color for fast line
1 in. x 100 ft. Blue PEX-A Pipe (Blue)
Durable, flexible PEX-A expansion pipe for potable water systems. Designed for maximum flow and fewer leak points, this blue tubing clearly identifies cold-water runs and resists coil memory for easier installs.
Key Features:
- PEX-A Flexibility: Bends easily to reduce fittings and potential leak points
- Full-Flow Design: Larger ID helps maximize water output
- Cold Water Identification: Blue color for fast line recognition
- Wide Temp/Pressure Range: Rated to 160 psi @ 73.4°F, 100 psi @ 180°F, 80 psi @ 200°F
- Corrosion-Resistant Build: Cross-linked polyethylene withstands harsh conditions
Please check the Product Data Sheet Here
Specifications Table:
| Specification | Details |
|---|---|
| Application | Potable Water |
| Color Family | Blue |
| Color/Finish | Blue |
| Connectivity | Barb; compatible with expansion, crimp, clamp, or sleeve methods |
| Material | Cross-Linked Polyethylene (PEX) |
| Maximum Flow Rate (GPM) | 3.8 |
| Maximum Working Temperature (F) | 200 |
| Maximum Working Pressure (psi) | 160 |
| Minimum Working Temperature (F) | -40 |
| PEX Type | A |
| Pack Size | 1 |
| Pipe Features | Corrosion Resistant; Ductile; Flexible; Heat-repairable if kinked; Less coil memory |
| Pipe or Fitting Product Type | Pipe & Tubing |
| Product Weight (lb.) | 17.2 |
| Certifications and Listings | ANSI Compliant; ASTM Compliant; CSA Listed; NSF Listed; cNSFus-pw; CSA B137.19 |
| Manufacturer Warranty | 25 Years: For exclusive use with ASTM F1960 fittings. |
| Actual Inside Diameter (in.) | .862 |
| Actual Outside Diameter (in.) | 1.125 |
| Nominal Inside Pipe Diameter (in.) | 1 |
| Pipe Wall Thickness (in.) | 0.1315 |
| Product Length (ft.) | 100 |
| Maximum Pressures & Temperatures | 160 psi @ 73.4°F; 100 psi @ 180°F; 80 psi @ 200°F |
| Compatibility | Compatible with Uponor and Wirsbo PEX systems; Tectite push-to-connect fittings |
| Installation Environments | In concrete, gypsum-based lightweight concrete, sand, asphalt, in/under wood flooring, or behind wallboard/plaster |
Frequently Asked Questions (FAQ):
Q: What fittings are compatible?
A: Works with ASTM F1960 expansion fittings and is also compatible with crimp, clamp, or sleeve methods, plus Tectite push-to-connect fittings.
Q: Is it safe for potable water?
A: Yes, it is listed for potable water applications and meets standards such as NSF and CSA listings.
Q: What are the dimensions?
A: Nominal 1 in. pipe with 1.125 in. OD, 0.862 in. ID, and 0.1315 in. wall thickness; 100 ft coil.
Q: Can it be repaired if kinked?
A: Yes, heat can be applied to repair kinks due to the shape memory of PEX-A.
Q: Where can it be installed?
A: Suitable for installations in or under concrete, gypsum-based lightweight concrete, sand, asphalt, wood flooring, or behind wallboard or plaster.
Sculptural Utility in a Cool Cerulean Hue
This vivid blue PEX line introduces a clean, architectural thread through utility spaces, turning function into a subtle design statement. Its smooth, continuous bends create an elegantly streamlined silhouette behind walls and under floors. Pair with matte-black manifolds for a striking, modern contrast and pristine organization. It’s the refined backbone of a well-appointed home—quiet luxury in every turn.
Upgrade your water lines with flexible, corrosion‑resistant PEX-A that installs faster and flows stronger—add to cart now.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 382 reviews
Sort
Product Reviews
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Good Product
Size: 3 Panel-102'', Color: Beige
I got these dividers for outdoor use for some privacy from neighbors. They arrived quickly and were easy to set up. They look good, and though the legs don’t offer stability against any amount of wind—which I expected as it wasn’t advertised for outdoor use—all it took was placing a cinder block on the feet to hold it up right. Coverage is good, it’s easy to fold and move as needed, and it’s light weight. All in all a decent product. I will caution the purchase of “used like-new,” as both of the dividers I ordered were previously returned items, and one came missing a cap, instructions were not included, and the poles were all mixed up and not properly labeled. If I had not ordered a second divider (which did include the instructions) I would have had a much harder time figuring out which pieces were which and how to put them together.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2025
★★★★★ 5
So versatile! Perfect solution for dividing a room.
Size: 4 Panel-88'', Color: Grey, Size: 4 Panel-88'', Color: Grey
Perfect solution for my space. My office has to double as the hangout room for the kids and I wanted something that would block off my computer so it is left alone. This space allows me to close off my computer as much or as little as I want. It is lightweight yet has sturdy feet. This is important so that if it gets bumped it won’t topple over. The price was great and the build time wasn’t too bad! I would recommend two people for set up. I went with the grey panels and I think I’ll end up hanging some twinkle lights at some point. Great purchase!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 9, 2025
★★★★★ 4
4/5 Stars
Size: 4 Panel-88'', Color: Black
Very tall and easy to set up, the only thing I will say is that they do have large gaps in between, so you won't have 100% privacy unless you add a curtain in the back. Other than that, they are easy to fold, sturdy, and esy to assemble. The gaps are an easy fix so I would say they are worth it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
★★★★★ 5
Great product and worth the money.
Size: 4 Panel-88'', Color: Black
Portable and stable. Perfect size and gives me the privacy I need when working from home. Stability is great as long as you place the stands correctly it won't wobble. I love it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
recommand products
Super Bird Creations SB748 Flying Trapeze Bird Toy for Conures, Quakers, Caiques, Pionus, Senegals, Multi-Colored Chain, Seagrass Mat, Enrichment Toy - Medium Bird Size, 14" x 13" x 12"
27.24
Bird Parrot Chewing Toys Bird Beak Grinding Wood Block Colorful Fruit Swing Toy for Parakeet Budgie Cockatiel Cockatoo Conure Finch Lovebird African Grey
11.19
Bird Parrot Toys with Wood Blocks Beads and Colorful Ball, Corn & Carrot Style Hanging Parrots Cage Chewing Cascade Bite Toy for Small Medium Birds (Corn+Carrot)
18.19
Tuccilo: Organmind - 12-INCH SINGLE
15.98
Losoul: Brain of Glass - 12-INCH SINGLE
10.00