Dodge 98.5-02 24v Injector SET - 150HP

Dodge 98.5-02 24v Injector SET - 150HPDDP ISB150 NO CORE CHARGE Dodge 98. 5 02 24v Injector SET: Injector set intended for high performance use with little to no towing. Should be used in high performance applications only and will supply enough fuel to support 550 RWHP. Injector set utilizes Dynomite's exclusive SAC nozzles. Upgraded turbo(s) are mandatory. Sold as a matched set with no core charge. NOTE: Some trucks may exhibit a slight lope at idle due to nozzle design utilized. If a

DDP ISB150
NO CORE CHARGE

Dodge 98.5-02 24v Injector SET:  Injector set intended for high performance use with little to no towing.  Should be used in high performance applications only and will supply enough fuel to support 550 RWHP. Injector set utilizes Dynomite's exclusive SAC nozzles.  Upgraded turbo(s) are mandatory.  Sold as a matched set with no core charge.

NOTE:  Some trucks may exhibit a slight lope at idle due to nozzle design utilized.  If a modified VP44, oversized injection lines, or oversized connector tubes are installed, the lope will likely be much worse. 

IMPORTANT NOTE: Some 1998.5 trucks will need new connector tubes when installing ANY new set of injectors. If engine serial number is less than 56462598, you will be required to purchase connector tubes or your new injectors will not seal properly with the OEM connector tubes. Our part number for the connector tubes is: DDP 9802CON and they also come with new O-Ring.