1550 Carbon Fiber Propellers Set for DJI Inspire 2 (15x5)

DESIGN

Genuine Xoar Props Specially designed and created for DJI Inspire 2.

PREMIUM MATERIAL

These CF props are made of premium Carbon Fiber fabric and proprietary resin system that offer ultralight weight to maximize efficiency and torque for Aerial Applications. XOAR Propellers are the perfect upgrade for your DJI Inspire 2 for Aerial Cinematography, Security, Agriculture, Survey & Mapping, Research & Rescue, Traffic Monitoring & more.

ADVANCED DESIGN AND CRAFTSMANSHIP

XOAR PJP-T-L Carbon Fiber Precision Pair Quadcopter Propellers are designed and engineered with unique blade shape and thin hub. The pairs have the same pitch and same weight for accurate, responsive and stable performance. The maximum tolerance of weight difference for each pair is 0.5 gram; this ensure consistent performance - same torque is produced by the motors on each pair of opposite arms - for your DJI Inspire 2.

PERFORMANCE

XOAR's Carbon Fiber Quadcopter Propeller for DJI Inspire 2 are constructed to offer maximum strength and endurance by it's unique structural design. The superior strength reduces flexing of the tips in Drone flight which greatly lower noise and vibration to yield a stable, responsive, smooth, accurate and quieter flight compare to the stock DJI Props.

Self-Tightening ADAPTER

Xoar Self-Tightening adapters are made with high quality aluminum. New patent pending locking mechanism will securely lock the propeller and adapter in place for flights. You can conveniently mount or discount the propellers in seconds. The adapters come with 2 sets of mounting holes with circular diameter of 12mm and 13mm in order to support both DJI and other motors mounting pattern, such as T-motor, KDE motors. It is recommended to apply threadlocker on the adapters to hold the props in more securely. Please note, it is optional to install the props using the adapters. The propellers can be mounted directly on the motors.

1. These XOAR Props can be mounted using the XOAR Self-Tightening Adapters or directly on DJI Inspire 2's motors. First, please remove the original DJI Inspire 2 adapters.
2. Self tightening adapters are compatible with motors with mounting holes distance of 12mm and 13mm.
3. The arrow on the self tightening adapter should be pointing to the direction of propeller rotation.
4. Use 2 x Short Screws to install the Bottom CW Adapter (Black) onto the Motor (CW) 
5. Use 2 x Long Screws to install the Top Plate (Black ), Propeller (CW) onto the Top CCW Adapter (Black)
6. IMPORTANT: Do NOT proceed to mounting the propeller & adapter onto the motor if the round head screws stick out on the inside of the adapter after installation. Please contact XOAR at www.xoarintl.com
7. Repeat Step 1 & 2 to install CCW Propeller, CCW Adapter (Silver) and CCW Motor
8. Please check for loose caps and tighten them before each flight
9. Do not screw right on the propeller. Do not over tighten screws. Use adapter plate included.
10. Please Note: Final balance check is suggested before flight due to external factors such as temperature, handling during transit may vary the balance of the propeller.

1. Align the top and bottom CW adapter
2. Turn counter-clockwise to spin the propeller on until it's tight all the way. Please hold the motor as needed.  

1. Turn clockwise to loosen up the propeller on until it's tight all the way. Please hold the motor as needed.  
2. Lift the propeller up from the bottom adapter. 

• 2 x Xoar 2nd Gen PJP-T-L15X5-IN2 1550Carbon Fiber Propellers CW
• 2 x Xoar 2nd Gen PJP-T-L15X5-IN2 1550 Carbon Fiber Propellers CCW
• 4 x Aluminum Self Tightening Adapter (2 Silver for CCW, 2 Black for CW)
• 10 x M3 Round Head Screws
• 10 x M3 Flat Head Screws
• 1 x Hex L-wrench for M3 screws.

• Model #: PJP-T-L15X5-IN2
• Diameter: 15"
• Pitch: 5
• Average Net Weight / Prop: 22 ± 0.5 g
• Bore Size: 5mm
• Side Holes Size: M3
• Side Holes Centers' Distance: 13mm
• Life Span Without Damages: 200 hrs
• Max. RPM: 7000

• Each adapter has 3 pieces - Top Plate, Top Self-tightening Adapter, Bottom Self-tightening Adapter.
• Each Adapter weights 11.6 g