H-7 (200ml)

H-7 (200ml)Applications Contents 200ml, 2x Applicator Pad, 2x Microfiber Towel Features 2 Years Durability Hydrophilic Coating H 7 was originally formulated for vending machines in Japan in the early 2000s and later found its use to protect objects in harsh environments: vehicles, wheels, marine vessels, vending machines, trains, signage, aircrafts, and other outside equipment and its housing. The product creates a tough, silicon based coating that forms a hard

Applications

Contents - 200ml, 2x Applicator Pad, 2x Microfiber Towel

Features - 2 Years Durability Hydrophilic Coating

H-7 was originally formulated for vending machines in Japan in the early 2000s and later found its use to protect objects in harsh environments: vehicles, wheels, marine vessels, vending machines, trains, signage, aircrafts, and other outside equipment and its housing. The product creates a tough, silicon-based coating that forms a hard glass layer to protect objects against corrosion from rain, salt, mud, chemicals, UV radiation, and even light abrasion. Excellent self cleaning effect with its hydrophilic properties and is absolutely safe for the paint. Can be used on gloss and matte surfaces. Coating provides superior waterproof and anti-rust functions, which makes it a suitable choice of coating for items that are installed outdoor.

✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water

✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc

✔️ Hardness – Excellent resistance against micro scratches caused by wind dust and dirt

✔️ Adhesion – Adheres tightly to paint allowing coat to have a long lasting durability

✔️ Super Hydrophilic – Excellent water sheeting effect, prevents water stain adhesion

FIELD TEST RESULTS

Drainage Performance Test – Water on hood receding

Less Frequent Visit to Car Wash

3 Months  Outside Exposure Test comparison to generic body glass coating

 
VENDING MACHINE (6 MONTHS AFTER APPLICATION)

 
Direction

1. Completely remove grease and dirt from areas to be treated. If a cleaning agent or water is used, allow to dry completely.

2. Use Silicone Off to wipe down any remaining residual this will allow a stronger bond between the surface and coating.

3. Apply liquid to the white surface of the included sponge. Apply evenly to the surface, leaving no untreated or poorly covered areas. Use each sponge for only one application (do not reuse a sponge that has hardened).

4. Allow to dry for approximately 5 minutes, and wipe down lightly with the included cloth.

5. After coating, leave to cure in a dry place for 12 hours.

CAUTION!!!