MAYCO Pink Opal Dry Glaze 4.5kg

MAYCO Pink Opal Dry Glaze 4.5kgMAYCO Pink Opal Dry Powder Dipping Glaze 4. 5kg Use Mayco Stoneware Dry glazes for fast dipping and layering action, creating natural flowing effects. All you need to do is add water, slake, stir and DIP! Mix with water for dipping, layering or pouring techniques no sieving required. Great for pieces with a lot of surface texture and for layering techniques. Colours and formulas are identical to their liquid brush on variants (minus the added organic

MAYCO Pink Opal Dry Powder Dipping Glaze 4.5kg

Use Mayco Stoneware Dry glazes for fast dipping and layering action, creating natural flowing effects. All you need to do is add water, slake, stir and DIP! 

• Mix with water for dipping, layering or pouring techniques - no sieving required.
• Great for pieces with a lot of surface texture and for layering techniques.
• Colours and formulas are identical to their liquid/brush on variants (minus the added organic gums).

Cone 6 oxidation: Pink Opal produces a desert rose pink that ranges from semi-translucent to fully opaque, depending on application thickness. Thin applications yield a clear glaze with hints of pink precipitate; heavier applications will create an opaque purple-pink gloss finish that can also form a whitish cast in select areas.

Cone 10 reduction: Pink fades out entirely, leaving a transparent gloss with white pooling.

TIP: Vertical pieces best allow the glaze to flow and create a semi-transparent, rose veil. Body textures and features will still be visible through the glaze. Thinner application will provide a glossy transparent finish. Thicker application will provide light pink floating. Surface decoration will be visible under the glaze, but if you apply the glaze thick, it could blur your image.

MIXING INSTRUCTIONS

1. Prior to opening, gently tumble bag to redistribute material. Sieving is not necessary.
2. Mix one 4.5kg bag of dry material into at least 5.5kg of water and stir thoroughly.
3. If needed, add additional water until desired consistency is reached. Mayco recommends a Specific Gravity in the range of 1.47-1.51 for a 1 second dip time; you may want to mix to a lower Specific Gravity if you layer your glazes or tend to dip longer. 
4. Stir well before each use.

Always wear a respirator when handling dry glazes.

DIPPING TIPS

1. Immerse the ware for 1-2 seconds. We suggest using dipping tongs. One dip of Mayco Dry is equivalent to 3 coats of brush-on glaze.
2. Shake excess glaze off gently. Allow the glaze to dry before applying additional coats, if desired.
3. Fire to preferred temperature between cones 5-10 (1186°C-1285°C).

Testing is always recommended. The choice of clay body, the thickness of glaze application, the firing process, and temperature will affect the fired results.