Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
FR-702 Repair System 230VPowerful rework stations that contain every function needed for rework Safer and more secure rework operation With upgraded all the applications 4 in 1 unit for space saving Compatible with N2 system by purchasing N2 iron (FX 8802) as an optional accessary Please refer to the User Manual for detailed specifications. Features 4 Port Rework Station with 140 W desoldering gun, M type soldering iron and 670W hot air It handles various soldering,
- Powerful rework stations that contain every function needed for rework
- Safer and more secure rework operation
- With upgraded all the applications
- 4-in-1 unit for space saving
- Compatible with N2 system by purchasing N2 iron (FX-8802) as an optional accessary
Please refer to the User Manual for detailed specifications.
Features
4 Port Rework Station with 140 W desoldering gun, M-type soldering iron and 670W hot air
-
It handles various soldering, desoldering and reworking by choosing proper handpieces from a selection of 7 types.
Other than the standard handpieces of 140 W desoldering gun, M-type soldering iron and high power & large volume hot air, there are 4 more applications. Consumed tip nozzle and heating element can be replaced individually, and running cost is much lower than the composite type.
- High-power Desoldering gun HAKKO FR-4103
Increasing the power to 140 W from 50 W of our previous models (HAKKO 474・475), it can make it easy to desolder on multi-layer PWB which was never an easy job, and it can also shorten the process time. A wide selection of nozzle, with the addition of new types, is available for a variety of desoldering works.
- Long type nozzles for narrow space
- Oval shape nozzles for flat terminals
- SS type nozzles for micro land-patterns
- Soldering iron HAKKO FX-8801/FX-8805
Thermal conductivity has been increased by reviewing external configuration and internal structure of 900 tip series. Now T18 and T19 tip series are selectable depend on work environment.
- Hot air handpiece
670 W high power and large volume hot air improves work efficiency.
- High power and large volume hot air for quick removal of components. New type of nozzles for improvement of temperature characteristics
The new nozzle improves work efficiency with uniform heating by hot air convection inside the nozzle which is created due to vents on the nozzle top. (only with BGA nozzles)
- Vacuum pickup function
The vacuum pick up function is to pick up a component with a suction pad and vacuum. It will pick a component only after the hot air melts solder joints. This can avoid an error to peel off the land by removing a component with excessive force.
- Pickup indicator lets you know the pickup timing at a glance!
By pre-setting pickup function, a component can be picked up automatically when solder is melted. Then, the indication comes up and the moment of picking up will be visible.
Even a component and solder joints cannot be seen as covered by a nozzle, easy and safe picking up is possible.
- N2 soldering iron HAKKO FX-8802
The N2 gas runs into the nozzle assembly and covers over the soldering tip. It prevents the soldering tip and the heater from being readily oxidized and performs great role as a preheating.
Two effects of N2 system, preventing oxidation or preheating effect, can improve soldering defects such as bridging, protrusion icicle, insufficient solder filling in PTH, etc.
T18 tips series are compatible with this application.
- One-hand Manual-solder-feed iron HAKKO FX-8803
- Solder and feed with one hand
- Feed a set amount of solder with one hand
- Manual feed system is perfect for cellular manufacturing.
- Soldering work can be conducted at the pace of the operator.
- T18 tips series are compatible with this application.
- SMD Hot Tweezer HAKKO FX-8804
- Direct heating—less influence upon surrounding components on crowded boards.
- Easily removes SMD chips and flat packages up to 25mm.
- The collet allows easy replacement and alignment of the tips.
Specifications
| Model No. | FR-702(Desoldering tool: FR-4103) |
|---|---|
| Power consumption | 1,030W |
Station
| Dimensions | 370(W)×150(H)×220(D) mm |
|---|---|
| Weight | 9 kg |
Station (Soldering)
| Output voltage | AC 26V |
|---|---|
| Temperature range | 50 to 480ºC |
| Temperature stability | ±1ºC at idle temperature (When set to 200 to 480ºC) |
Station (Desoldering)
| Output voltage | AC 24V |
|---|---|
| Vacuum generator | Vacuum pump, double cylinder type |
| Vacuum pressure | 80kPa (600mmHg) |
| Suction flow | 15L/min. |
| Temperature range | 330 to 450ºC |
| Temperature stability | ±5ºC at idle temperature |
Station (Hot air)
| Power consumption | 30W |
|---|---|
| Air flow | 1 to 9 (5 to 115L/min.) L/min. |
| Temperature range | 50 to 600ºC |
Soldering iron
| Power consumption | 65W(26V) |
|---|---|
| Tip to ground resistance | <2Ω |
| Tip to ground potential | <2mV |
| Heating element | Ceramic heater |
| Standard tip | Shape-B (No.T18-B) |
| Cord length | 1.2m |
| Total length | 222 mm (with B tip) |
| Weight | 52 g (with B tip) |
Desoldering Gun
| Power consumption | 140W (24V) |
|---|---|
| Nozzle to ground resistance | <2Ω |
| Nozzle to ground potential | <2mV |
| Heating element | Composite heater |
| Standard nozzle | Φ1.0mm S type (No.N61-05) |
| Cord length | 1.2 m |
| Total length | 168 mm (with Φ1.0mm S type nozzle) |
| Weight | 190g(with Φ1.0mm S type nozzle) |
Handpiece (Hot air)
| Power consumption | 670W |
|---|---|
| Total length | 250mm |
| Weight | 180g |
* The suction flow is measured at the filter case suction port of station.
* Airflow capacity is rated as free flowing. Restrictions created by various nozzles may reduce the maximum airflow capacity.
* Total length and weight (w/o cord, hose)
Replacement Parts
|
Name |
Specifications |
|
Soldering iron FX-8801, 65W (26V), w/B tip |
|
|
Heating element, 65W (26V) |
|
|
B5122 |
Enclosure pipe assembly |
|
FR4103-81 |
Desoldering tool FR-4103 |
|
A5055 |
Heating element 140W (24V), for FR-4103 |
|
B5222 |
Enclosure pipe for FR-4103 |
|
B5185 |
Filter pipe assembly |
|
B5105 |
Filter pipe assembly |
|
A5044 |
Ceramic paper filter-L (qty 10) |
|
A1033 |
Ceramic paper filter-L (qty 10) |
|
Pre-filter |
|
|
Front holder |
|
|
Filter holder |
|
|
Filter (qty 10) |
|
|
A1013 |
Diaphragm (qty 2) |
|
Valve plate (qty 2) |
|
|
B5045 |
Pipe |
|
B5049 |
Mica with heater protection sleeve |
|
B5048 |
Iron holder |
|
Heat resistant pad |
|
|
C5030 |
Tool box |
|
B5106 |
Nozzle wrench |
|
Cleaning pin for nozzle Φ1mm |
|
|
B1215 |
Cleaning pin for heating element |
|
Cleaning drill for nozzle Φ1mm |
|
|
B1306 |
Drill holder nozzle Φ0.8/1mm |
|
B1309 |
Drill (nozzle Φ1mm, qty 10) |
|
FH800-03BY |
Iron holder <w/ cleaning sponge, cleaning wire> blue and yellow |
|
Cleaning sponge for FH-800 |
|
|
A1561 |
Cleaning wire for FH-800 |
|
FH410-82 |
Iron holder <w/ cleaning wire> for FR-4103 |
|
Cleaning wire |
|
|
A1438 |
Pad/7.6mm (qty 5) |
|
A1439 |
Pad/5mm (qty 5) |
|
A1520 |
Pad/3mm (qty 5) |
|
B3023 |
Vacuum pipe control knob (L) with screw |
Options
|
Part No. |
Name |
|
FX8802-01 |
Soldering iron FX-8802 65W (26V), w/B tip, for N2 soldering |
|
FX8803-02 |
Soldering gun FX-8803 65W (26V), w/3CF tip |
|
FX8803-03 |
Soldering gun FX-8803 65W (26V), w/3CF tip |
|
FX8803-04 |
Soldering gun FX-8803 65W (26V), w/3CF tip |
|
FX8804-02 |
SMD hot tweezer FX-8804 65W (26V), w/2L tip |
|
FX8804-03 |
SMD hot tweezer FX-8804 65W (26V), w/2L tip |
|
FX8804-04 |
SMD hot tweezer FX-8804 65W (26V), w/2L tip |
|
FX8805-01 |
Soldering iron FX-8805 65W (26V), w/B tip, for soldering (L type) |
|
C5046 |
Nozzle quick changer for FR-4103, FR-301 |
|
B5228 |
Receptacle for C5046 |
|
B5230 |
Oval nozzle positioning jig for FR-4103 |
|
Iron holder <w/ cleaning sponge> for 951,952,958,959 (Discontinued) and FX-8803 |
|
|
FH800-04BY |
Iron holder <w/ cleaning sponge> blue & yellow, for FX-8804 |
|
B3666 |
Holder clip |
|
Cleaning pin for nozzle Φ0.8mm |
|
|
Cleaning pin for nozzle Φ1.3mm |
|
|
Cleaning pin for nozzle Φ1.6mm |
|
|
B5141 |
Cleaning drill for nozzle Φ0.6mm |
|
Cleaning drill for nozzle Φ0.8mm |
|
|
B1304 |
Cleaning drill for nozzle Φ1.3mm |
|
B1305 |
Cleaning drill for nozzle Φ1.6mm |
|
B5142 |
Drill holder for nozzle Φ0.6mm |
|
B1307 |
Drill holder for nozzle Φ1.3/1.6mm |
|
B5143 |
Drill (nozzle Φ0.6mm, qty 10) |
|
B1308 |
Drill (nozzle Φ0.8mm, qty 10) |
|
B1310 |
Drill (nozzle Φ1.3mm, qty 10) |
|
B1311 |
Drill (nozzle Φ1.6mm, qty 10) |
|
B5126 |
Air guard assembly with air guard fixing bracket |
|
C5027 |
Board holder |
|
C5028 |
Grip fixture M set with hexagon wrench, o-ring and tray |
|
C5029 |
Grip fixture L set with hexagon wrench and o-ring |
|
B5098 |
Board clip |
|
B5136 |
Board support unit |
|
B5138 |
Positioning unit |
|
B5137 |
Rubber foot |
|
Cleaning sponge yellow |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy