35mm to 120 Film Adapter

35mm to 120 Film AdapterBrand new 3D printed adapter set designed to allow 35mm film to be used in 120 medium format cameras. Perfect for creative photography, panoramic style images and sprocket hole exposures (on compatible cameras). Lightweight, reusable and easy to install. A simple way to experiment with 35mm film in your medium format setup. Use 35mm film in 120 cameras 3D printed Brand new Reusable design Ideal for creative and experimental shooting How to Use the

Brand new 3D printed adapter set designed to allow 35mm film to be used in 120 medium format cameras. Perfect for creative photography, panoramic-style images and sprocket-hole exposures (on compatible cameras).

Lightweight, reusable and easy to install. A simple way to experiment with 35mm film in your medium format setup.

• Use 35mm film in 120 cameras
• 3D printed
• Brand new
• Reusable design
• Ideal for creative and experimental shooting

How to Use the 35mm to 120 Film Adapter

1. Insert the 35mm film cartridge into the adapter holder.

2. Place the adapter into your camera in the same position as a normal 120 roll.

3. Insert an empty 120 spool on the take-up side.

4. Pull the 35mm film leader across the film gate and attach it securely to the take-up spool.

5. This apply to some cameras - Block the red window on the back of the camera (use black tape or cover it completely). This prevents light leaks, as 35mm film does not have backing paper.

6. Close the camera back carefully.

7. Advance the film manually between shots (there are no visible frame numbers).

8. When finished, rewind the 35mm film fully back into the cartridge before opening the camera.

Important

• Manual film advance is required.
• Frame spacing must be judged by feel or estimation.
• Compatible with most 120 medium format cameras using standard spools.