Ducati Monster 821 [A-SIDER] - Tankgriff 5 Schrauben Silber Ducati
SKU: 49466353086

Ducati Monster 821 [A-SIDER] - Tankgriff 5 Schrauben Silber Ducati

$99.90 $111.00
Save 10%
No.2 Bestseller on sylv1net.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 6 - Jul 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Ducati Monster 821 [A-SIDER] - Tankgriff 5 Schrauben Silber DucatiDer Tankgriff von A SIDER ist eine innovative Lsung fr Motorradpassagiere, die whrend der Fahrt zustzlichen Halt bentigen. Dieses Zubehr ist speziell dafr entwickelt, die Sicherheit und den Komfort des Beifahrers zu verbessern und gleichzeitig das Gesamtdesign des Motorrads zu ergnzen. berblick Der A SIDER Tankgriff wird direkt am Tankdeckel montiert und ist so konzipiert, dass er sich in optimaler Reichweite fr die Hnde des Beifahrers befindet. Durch

Der Tankgriff von A-SIDER ist eine innovative Lösung für Motorradpassagiere, die während der Fahrt zusätzlichen Halt benötigen. Dieses Zubehör ist speziell dafür entwickelt, die Sicherheit und den Komfort des Beifahrers zu verbessern und gleichzeitig das Gesamtdesign des Motorrads zu ergänzen.

Überblick

Der A-SIDER Tankgriff wird direkt am Tankdeckel montiert und ist so konzipiert, dass er sich in optimaler Reichweite für die Hände des Beifahrers befindet. Durch seine strategische Positionierung bietet der Griff einen stabilen und sicheren Ankerpunkt, der während der Fahrt leicht zugänglich ist.

Design und Komfort

Die Oberfläche des Griffs ist so gestaltet, dass sie keine scharfen Kanten aufweist, was die Gefahr von Verletzungen oder Unbehagen für den Passagier minimiert. Die Lackierung ist sowohl benzin- als auch abriebfest, was eine lange Haltbarkeit und ein anhaltend gutes Aussehen gewährleistet.

Einfache Installation

Die Montage des A-SIDER Tankgriffs ist unkompliziert und kann ohne spezielle Werkzeuge durchgeführt werden. Dies ermöglicht es den Fahrern, das Zubehör schnell und einfach zu installieren oder bei Bedarf zu entfernen.

Technische Daten:

  • Farbe: Silber
  • Volumen: 1802 cm³
  • Gewicht: 478 g
  • Länge: 233 mm
  • Breite: 209 mm
  • Höhe: 37 mm

Sicherheitskonformität

Der A-SIDER Tankgriff entspricht der europäischen Richtlinie für Motorradgriffe (Richtlinie 93/32 * 1999 / 24/CE), was seine Sicherheit und Zuverlässigkeit unterstreicht. Dies stellt sicher, dass das Produkt den strengen europäischen Standards für Motorradzubehör entspricht.

Fazit

Der A-SIDER Tankgriff ist eine hervorragende Wahl für Motorradfahrer, die ihren Passagieren zusätzlichen Halt und Sicherheit bieten möchten. Mit seinem robusten Design, der einfachen Installation und der Konformität mit Sicherheitsrichtlinien bietet dieser Griff eine ideale Kombination aus Funktionalität und Stil.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 49466353086

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 299 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
S.landia_Librarian
New York, US
★★★★★ 1
Issues with mounting the shelves, big time
Color: Brown, Size: 55.1"W x 10.3"D x 1.8"H, Set of 2
I bought the 55 inches floating shelves. I have an area above my linen cabinet that I wanted to utilize for storage and books in my hall. I did my measuring, figured out spacing. Marked everything off to do 3 total shelves (bought two boxes). A couple of spots screwed into a stud, and the others I had to install the plastic mount things. I had used those before so I just did the predrill then tapped them in, finished off by screwing the mount flush with the wall. I grabbed the first bracket and decide to start with a screw that had one of the inset mount things (sorry the correct term is escaping me). It never once occurred to me to check that the plastic mount and screw would not work. We’ll surprise! I tried and tried to get the screw to screw thru the mount, the mount is the rigid plastic thoe that is supposed to split when the screw goes through. Well something wasn’t engineered properly on the mounts cuz they would not thread a screw. They would not split. I even went into my garage and tried different screws I had to see if maybe it was just too big…or something. Then I started just prying it apart and could not get it to split like it’s supposed to, the tip piece broke off before the piece split. I have never had this situation before. I now have a bunch of these, that leave huge holes in my wall, where I measured out for a shelf to go. I’m not a huge DIYer so now I’m trying to figure out if I can salvage this situation but I’m afraid that if I get different mounts they will be too small for the already created holes, or they will fit the hole but because it’s screwing into dry wall, the drywall already has threads from the other mount, will it strip if the threads aren’t 100% the same. Oooooor am I going to have to patch up and paint that wall, then buy new mounts and attempt to try again….which I will now have to set the shelves at a different height so I don’t screw into the same holes I patched since I don’t trust them…..ugh. I practically want to cry. lol. So if I could give this negative stars I would! I feel stupid due to these having such great reviews by others. Comments of how easy they were to install. I will also mention that a few others mentioned the metal bracket that is mounted to the wall then the shelf slide onto is very flimsy. I could bend it side to side with my hands. The only reason I decided it would be ok is that there are a total of 8 screws in the mount, figured it would be stable enough.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 14, 2025
R
Verified Purchase
Rhonda Emmons
Whiting, US
★★★★★ 5
Was so easy to put up.
Love it
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
E
Verified Purchase
Eric B
Birmingham, US
★★★★★ 4
Decent Quality. Look Great
Color: Brown, Size: 35.7"W x 10.3"D x 1.8"H, Set of 2
These are easy to install and the shelf has a good quality look. The only thing lacking is the quality of the bracket. The arms are thin metal and I feel like it won’t hold much weight.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 4, 2025
B
Verified Purchase
Ben'neel Suhail SR
Grantham, US
★★★★★ 5
Looks good.
Color: Grey, Size: 55.1"W x 10.3"D x 1.8"H, Set of 2
They look good in my den!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 22, 2026
W
Verified Purchase
William Brazell
Pawtucket, US
★★★★★ 5
Great quality and easy install
Color: White, Size: 55.1"W x 10.3"D x 1.8"H, Set of 1
Great quality. Very easy install. Mounted mine above my fireplace to create a mantel. Looks like it was there from the day the apartment was built. So far it has held a good bit of weight with heavy ceramic decor and one very fat cat jumping up on it lol.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 22, 2025

recommand products

Gorilla Skinny Three (saturn)
38.95
Xcel Insulate X Vest w/2mm Hood
84.95
Light The Wake (CV-Pro)
297.50
FCS II MF Twin +1 PC Aircore Tri Fin Set
129.95
Creatures of Leisure Mick Fanning Thermo Lite Pad (platinum black)
49.95