Darjeeling First Flush Bio 1000g (4x250g)
SKU: 41891616989

Darjeeling First Flush Bio 1000g (4x250g)

$56.69 $62.99
Save 10%
No.2 Bestseller on sylv1net.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 6 - Jul 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Darjeeling First Flush Bio 1000g (4x250g)Darjeeling First Flush Schwarztee Bio Klassischer Frhlingstee aus dem Himalaya Unser Darjeeling First Flush stammt aus der traditionsreichen Teeregion Darjeeling in Indien und zhlt seit vielen Jahren zu den beliebtesten Schwarztees unter Kennern. Die Region am sdlichen Rand des Himalayas ist bekannt fr ihre hochwertigen Tees, die an steilen Berghngen kultiviert und von Hand geerntet werden. Dieser First Flush berzeugt durch seine Frische, sein feines

Darjeeling First Flush Schwarztee Bio – Klassischer Frühlingstee aus dem Himalaya
Unser Darjeeling First Flush stammt aus der traditionsreichen Teeregion Darjeeling in Indien und zählt seit vielen Jahren zu den beliebtesten Schwarztees unter Kennern. Die Region am südlichen Rand des Himalayas ist bekannt für ihre hochwertigen Tees, die an steilen Berghängen kultiviert und von Hand geerntet werden. Dieser First Flush überzeugt durch seine Frische, sein feines blumiges Aroma und den typisch eleganten Darjeeling-Charakter.
Zur Sicherstellung der hervorragenden Qualität wird der Rohstoff in unserer Manufaktur in Deutschland kontrolliert und abgefüllt. Frei von jeglichen Zusatzstoffen. Geeignet für Veganer und Vegetarier.

Eigenschaften des Biotiva Darjeeling First Flush Tees
- First Flush – erste Ernte im Frühjahr
- 100 % Darjeeling Schwarztee aus kontrolliert biologischem Anbau (DE-ÖKO-005)
- Frisch, blumig und fein im Geschmack
- Typischer Darjeeling-Flavour mit eleganter Note
- Ohne Aromen oder Zusatzstoffe
- Vegan und naturbelassen
- In Deutschland kontrolliert und abgefüllt

Pflanzenwissen – Darjeeling aus dem Himalaya
Darjeeling liegt am südlichen Rand des Himalayas und zählt zu den bekanntesten Teeanbaugebieten der Welt.

Seit über 150 Jahren werden dort an steilen Berghängen hochwertige Teepflanzen kultiviert. Die besondere Kombination aus Höhenlage, Klima und traditioneller Handpflückung macht Darjeeling zu einem der edelsten Schwarztees weltweit.

First Flush bezeichnet die erste Ernte im Frühjahr. Die jungen, zarten Blätter verleihen dem Tee ein besonders frisches, blumiges Aroma mit einer leichten, eleganten Note.

Zubereitungsempfehlung
4–5 Teelöffel auf 1 Liter kochendes Wasser geben und ca. 3–4 Minuten ziehen lassen. Für ein milderes Aroma die Ziehzeit etwas verkürzen.

Zutaten
Darjeeling Schwarztee (First Flush)*
*aus kontrolliert biologischem Anbau (DE-ÖKO-005)

Herkunft & Qualität
Der Tee stammt aus Darjeeling (Indien). In unserer Manufaktur in Deutschland wird er unter strengen Qualitätsstandards geprüft und abgefüllt.

Vertrauen in Biotiva
Seit über 40 Jahren steht Biotiva für hochwertige Bio-Produkte, reine Pflanzenkraft und transparente Herkunft. Unsere Bio-Expertise seit 1982 spiegelt sich in allen Schritten wider – von der Rohstoffauswahl bis zur Qualitätskontrolle.
Alle Biotiva-Produkte werden in Deutschland verarbeitet und verpackt – verantwortungsvoll und nachhaltig.

Häufige Fragen (FAQ)
- Wie schmeckt Darjeeling First Flush?
Frisch, blumig und elegant mit einer feinen, typischen Darjeeling-Note.

- Was bedeutet First Flush?
First Flush bezeichnet die erste Ernte im Frühjahr, bei der besonders junge und zarte Blätter verarbeitet werden.

- Ist der Tee aromatisiert?
Nein – es handelt sich um einen naturbelassenen Schwarztee ohne Zusatzstoffe.

- Wo wird der Tee verarbeitet?
In unserer Manufaktur in Deutschland – inklusive Qualitätskontrolle und Abfüllung.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 41891616989

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 575 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
L
Verified Purchase
L. Yu
Natrona Heights, US
★★★★★ 4
pretty good banana plugs
Size: 5 Pack, Pattern Name: Banana Plugs
i bought these over 6 months ago and i just installed them to the front left and right floor standing speakers - sony ssf-7000 i have them for over 10 years hooked up to a yamaha 7.1 AVR. alot of people have had trouble installing this - one single banana plug comes in 3 parts - the bottom and top (the banana plug tip) can be unscrewed. what i did was tightened the top first (top being the tip of the banana plug) then unscrew the bottom off completely - make sure you have like 3/4" - 1" (depending on your gauge of wire) of exposed speaker wire that is straight - then thread it through the hole at the bottom up - i then rolled the exposed 3/4 - 1" exposed copper wiring into a ball that is bigger than the hole of the banana plug bottom piece so the wire doesn't fall back through where it came from. then i screwed on the top and middle piece back with the bottom piece - tightening it a bit so i know there's good contact. also make sure the tip is screwed in all the way as well as a double check. what you don't want to do is have the copper wire touch the threaded part of the bottom piece - the wire will cut off from the screwing action. i plugged it into my sony speakers and it wasn't a real snug fit - a bit too loose to feel secure - it didn't seem to go all the way in - but it fit fairly well in my receiver. my intention was to use these banana plugs with my 2 channel set up but i decided to go pre-constructed mediabridge 12 AWG speaker cable instead - those fit my 2 channel set up on my receiver and elacs really snug and secure. i tested it and it works fine. i didn't hear any loss of signal or any extraneous noise. none of my (14 awg?) wiring fell through the bottom and it sounds good. so no complaints there. i bought 5 pairs - but i find that it is an odd number to include a package - even numbered pairs would be better. anyway they seem constructed well - easy enough to install and they do work. thanks for reading
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 12, 2019
A
Verified Purchase
AB
West Palm Beach, US
★★★★★ 5
High quality and robust
Size: 12 Pairs, Pattern Name: Banana Plugs
Easily the best plugs I've found at a reasonable price. Solid feeling with good quality and they look good with easy to see red/black labeling. The tips tend to unscrew too easily, but this is a non-issue when they are in use, just something you have to be careful not to lose when assembling. It's a bit tricky to spread the wire out evenly at the exact right length. If screwing the plug together is hard at all, go back and shorten how much wire you bend over the lip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 16, 2025
W
Verified Purchase
William
Los Angeles, US
★★★★★ 5
Solid banana clips
Size: 5 Pack, Pattern Name: Banana Plugs
Ah yes, I used these solid banana plugs to convert my wires. It’s pretty easy to set up once the wire housing has been stripped and really cleans things up nicely. I haven’t had any discernable hissing, noise problems, or connection issues.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
L
Verified Purchase
Leyland Cypress
Pawtucket, US
★★★★★ 3
Get the right wire guage
Size: 1 Count (Pack of 1), Pattern Name: Banana Plugs
I rate the banana plugs themselves 4 stars. They are everything I expected and work as advertised. It's the experience of assembly that I rate three stars. The way these work is -- you strip off the outer insullation of your wire and separate the two leads (positive and negative). Then you strip some length of insulation off the end of one of your leads, you unscrew the banana plug so that it separates into its respective base (lower) and contact (upper) halves, you slip the wire up through the base, you flare the copper strands of the wire and fold the individual strands over the very top of the base (about 1/16 of an inch) (taking care not to extend the strands over the threaded barrel of the base), then you screw the upper contact onto the lower base and voila, banana plug / wire assembly. It's not as complicated as it sounds. Go to the Monoprice website and watch their excellent instructional video. Here's the thing though. While the assembly is not complicated, it is tricky, and if you don't get your proportions right the first or second or third time, you'll have to do it over. Fist of all, if your wire guage is relatively thin, like my 16-guage speaker wire, you'll find that the entire wire, insullation and all, will slip right through the base of the plug without butting up against the bottom of the base. If this is the case, then the wire is left to sort of flop around inside the plug and that has a kind of unfinished, amateur look and feel to it, whereas if the wire butts up against the bottom of the base, it has a solid, one-piece professional look. So, to my mind, there's a sweet-spot for wire guage that works best with this plug -- not too thin and not too thick. And since Monoprice has debunked the thicker-is-better myth (the quality of the copper is the real determinant), then you should feel free to get the wire guage that fits the plug. Next -- and here's where it gets tricky -- once your copper extends beyond the top of the base, you'll need to limit this extension to about a sixteenth (no greatrer than a fourth) of an inch. Then you very delicately flare out the individual strands, in a 360- degree arc, and fold the strands over the top of the base. This takes a fair degree of manual dexterity, especially if the wire is "floating" inside the base and its travel is not stopped where the insullation meets the base. You'll have to hold the wire and base steady in the fingers of one hand, then flare out the wire strands with either your fingers or a suitable object (the working end of a ball-point pen worked for me) with the other hand. This one-sixteenth measure is important. If you extend wire strands beyond the top and over the threads of the base, you'll find that screwing the contact end onto the base is impossible and you'll need to start over. One or two strands is OK and almost unavoidable. In that case the screwing will catch but if you take a pair of pliers to it you can muscle through. By the way, you can avoid the whole mess by getting the open-screw type, which I'm sure will work just as well without any of the hassle of assembly. Like anything else, if you do it a few times to make the mistakes and learn the tricks, then it will become second nature, and if you've already done that, then my review might seem overly fussy. In that case feel free to leave comments to help other readers.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 15, 2012
J
Verified Purchase
JBDoge
Boise, US
★★★★★ 5
Wish they came with instructions...
They are cheap and work great. They plug right into my Pioneer vsx521 receiver and my Paradigm Atom monitor speakers. I wish they came with instructions, because it took me about 10 minutes to realize the bottom part unscrews in addition to the top part. Here are my instructions for installation: 1) Unscrew the bottom part of this connector (the thin metal underneath the red/black ring). 2) Make sure the Banana Plug (which may be loosely screwed into the top part of the connector) is fully tightened down 3) Strip your wire tips to 3/8 of an inch (or just slightly under) 4) Run the first newly stripped wire end through the bottom part you removed in step 1, such that the stripped end of the wire is entering through the flat end and exiting through the smaller threaded end. 5) Leave about 1/8 to 3/16 of an inch of stripped wire hanging past the exit hole. 6) As evenly spaced as possible, bend the over-hanging wire strands over the exit hole (all around it, like a hat). If done properly, the wire should not fall out if you give it a VERY GENTLE tug. 7) Screw the top metal part (with the actual banana plug) back onto the bottom part. It may be difficult if your stripped wire is hanging too low. I've used a pair of pliers to grip the bottom part of the connector while I twist the banana plug side with my hand. If done correctly, you should be able to put a lot of tension between the wire and connector without removing/damaging it. UPDATE: I just recently helped my dad install his 5.1 system without these... it sucked... This item (5 pairs of them in this case) and a good wire stripper can save you alot of pain (both physical and mental). The connectors on the back of his receiver are the kind where bare wire comes in from the side and then the connectors screw down (with a banana plug hole in the center which is where this product would come into play). I felt like a surgeon trying to get a bare wire end into the little slot, and then holding it there while I tighten the connector which is almost impossible since they are so close together... GET THESE!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2012

recommand products

BARIDI 317
44.95
BARIDI 677
44.95
BARIDI 661
44.95
BARIDI 316
44.95
BARIDI 637
44.95